Manifold stud

[TRSCobra]

One of my manifold studs has the threads rusted off where the nut tightens down, so I took it out, but can't find a replacement. I'd get the stainless set from Shonut, but I only need one.

Where can I buy just one stud?

 

[stockblue95mtx]

Napa has these in card stock packages of 2 for $3-4. It will say Ford and it is an M10 x 1.5 thread. Length is 2 inches or so, not sure exactly.
stockblue95mtx

 

[SHOtimer]

IMHO, you should get the stainless steel package from SHOnut, because if one rusted through the others are on their way. I just installed them on my SHO and they are a good quality product. But, if not that Napa package works or you could go to Ford and just buy one.

Doug

 

[TRSCobra]

IMHO, you should get the stainless steel package from SHOnut, because if one rusted through the others are on their way.
Doug

I would, but the others are fine. Most people would probably re-use the one I deemed bad, but I usually get paranoid about those things, so I pulled it, thinking it would be a really easy find. Maybe next time i'll get that SHOnut package, but for now "If it aint broke..."

 

[AREA 91]

The studs are also available in the "Help" line. They are longer than stock, and come with brass nuts.

 

[TRSCobra]

I went to Advance, Autozone, Carquest, Napa, and the ford dealer. None of them had one that would work. There was no M10x1.50 studs in the HELP! line either. So I just bought the SHOnut set.

 

[AREA 91]

I do my best to support the SHO NUT as well. I'll post the part # for the HELP studs.

 

[AREA 91]

HELP Part #03101
M10.5 x 77

 

[Mr Anonymous]

I went to Advance, Autozone, Carquest, Napa, and the ford dealer. None of them had one that would work. There was no M10x1.50 studs in the HELP! line either. So I just bought the SHOnut set.

Good choice!

I hear that just those studs alone keep about 50% of the Canadian SHO contingent employed!