Lapeer Meet

[93mtx]

For anyone planning on using I69 to get from 23/75 there is major construction from Center RD to out past Davison. (parking lot) So, be advised you might try a different route.

Nathan

 

[Huntervf]

Thanks for the heads up!

Me and SHObill are going to have to pass on the drag day. With my commute being 130 miles a day my driver side halfshaft needs repalced this weekend, and Sunday is all taken up

I'll be at his place wrenching on a 91, 89, 95, and a Suburban

 

[SHOracer14]

Thanks for the heads up!

Me and SHObill are going to have to pass on the drag day. With my commute being 130 miles a day my driver side halfshaft needs repalced this weekend, and Sunday is all taken up

I'll be at his place wrenching on a 91, 89, 95, and a Suburban

How late will you guys be wrenching? I'm not going to be able to make it to lapeer because of work but I get off around 5 depending on how long an afterwork meeting we have lasts. I've been meaning to come up and give Bill a hand on things but my schedule is always tight so if you guys wouldn't mind a visit from the SHO-fairy and will be out there after 5 I'd be down for a visit. I would like you to look at the GTP anyways Chris as I need some advice on a few paint imperfections.

 

[Huntervf]

yeah we'll be there past 5. Give me a call, 810-931-5587.

 

[SHOracer14]

yeah we'll be there past 5. Give me a call, 810-931-5587.

Very sorry I didn't get ahold of you guys but Cinco de Drinko caused me to have a Cinco de Hangovero and as soon as my sick ace got off work sat. I went straight to bed. I do need to get up there one of these nights the only prob is I usually have weekdays off which I would come up on a weekday when you guys are just fartin' around.

 

[Huntervf]

No worries... I had to cut the day short and head home due to a death on my wife's side of the family. I did get the half shaft in bac at my house, but not much else got done obviously