completely pull out the section of the exhaust from the y pipe to the mufflers WITHOUT the use of a torch/ cutting. I am talking about the STRAIGHT pipe that connects the two. The restriction sound that I hear at WOT and 4000+ rpms has to be coming from under the sho?! It is NOT the cats, and the previous owner said that the mufflers are fairly new.
is it possible to...
- Thread starter DavidT
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Rob94
New Member
If it's a stock exhaust, cats back is one solid piece. It can be snaked out without dropping the rear axle, but it's not easy.
jelloslug
Digital
Well according to the '90 ford shop manual the middle section is a seperate piece, but the likelyhood of actually getting it apart is going to be slim since its a 12 year old flare fitting. You can try but dont get you hopes up. Also be carful using a heating torch under the gas tank... SHOboom!
Similar threads
