install new head unit and wiring sub seperatly

[fred79]

i have a pioneer head unit that i want to intall into my SHO it has 3 preamp out puts and I want to wire 2 to the speakers and wire the sub seperatly so i can use the built in freq bypass and sub controls. so i will need to run a new set of wires and also wirteh the existing wires to connect to the rca out on the radio head. I need to know which side is the side the factory wiring is run down and how to run the new wirering into the front console
also are there blank face plates avialable to fit the cd player slot

 

[SHOTIME]

Ok, First things first

Buy the "Premium sound" harness for a Ford

wire the two plugs to your stereo's harness color to color.

next take RCA's from the sub out, and run them down the passangers side of the car. be sure to include a amp turn on wire connected to the blue wire of the harness.

Now run a power wire from the battery to the turnk ON THE OPPOSITE side of the car.

Then a ground wire inside the trunk.. Good luck.

 

[fred79]

would the power wiring and ground be necessary since i am just connecting this to the factory amp i am not adding a amp yet just wiring the factory amp to seperate controls and is the factory amp wired with power on wire or just setup as power sensing. thanks!