Dr_Thompson
New Member
So i think im finaly done securing the subframe and everything around it. The motor mounts are in as is the steering rack. So i let down the engine jack and the engine sits fine. Now heres the problem, i can move the frame/body up and down, however the engine/ tranny dosnt move.I havn't installed the tranny to tranny mount bolts yet, im thinking that may be the problem. Somethings deffintley wrong though. The shifter wont line up with the tranny either so it seems like its sitting wrong. I did lower/lift the engine a lot during this process so i know its not sitting right. I dunno, could those tranny mount bolts play that big a factor in holding the frame and engine together?
