I think Autozone ordered me the wrong front crank seal

[1BAD91]

Hey guys I'm gonna do a front 60k this weekend and I had autozone order me a front crank seal, and I dont think its right, because its 4" it diameter. From what I read the seal is 2" in diameter, so it sounds like he ordered the rear seal. Is this correct or is the front seal 4"?

 

[luigisho]

Do you have a part number?

 

[1BAD91]

710219

 

[rbruso]

710219

That's a Timken rear seal, but it does look to be correct for the SHO. 710220 should be the front.

 

[luigisho]

Yep

http://www.summitracing.com/parts/TMK-710219/Application/?prefilter=1

 

[1BAD91]

Thanks guys I had Autozone order the correct part and they said I should have it tomorrow. I called a Ford dealer in Georgia that had 17 in stock, and they wanted $100 for over night shipping! WTF

 

[SHOtimer]

www.shosource.com has them.

Doug

 

[JRA2000TL]

Use a Timken or National seal and you'll be fine for the front main. If you replace your cam seals, do NOT use Fel-Pro. Use the Nationals for those too. Fel-Pros leak. For the front main, you might be alright either way, but I suggest only Timken, National, or Motorcraft.

 

[1BAD91]

Use a Timken or National seal and you'll be fine for the front main. If you replace your cam seals, do NOT use Fel-Pro. Use the Nationals for those too. Fel-Pros leak. For the front main, you might be alright either way, but I suggest only Timken, National, or Motorcraft.

The cam seals look good. I dont see any oil leaking from them, so im just going to let them be.