Help with codes.

[zach44102]

I just pulled my codes after the check engine light being on for a year now and i got a couple codes that im not to sure what they mean.

i got 114- i understand thats normal

519-PSP switch/circuit open
126-MAP or BARO sensor out of range
112-Intake Air Temperature (IAT) sensor is/was low or grounded

im going back out to clear the codes and then try again... thanks

 

[zach44102]

I cleared the codes and did a KOEO and got
not worried abouT the first two

126
114
519-PSP switch/circuit open - PSP
551-Problem in Intake Manifold Runner Control (IMRC) solenoid/circuit - Solenoids

KOER test and a cylinder balance test my codes displayed where

116
114
538
521

note i did turn the wheel when i performed this test but was i supposed to hold the wheel turned?

 

[shonuffmine]

turn all the way to the left then all to the right recentering is not necessary here,s a good link http://www.shotimes.com/php-bin/mod...le=article&mode=thread&order=0&thold=0&sid=83

 

[zach44102]

i used www.shopheonixproject.com but it was not that detailed..

 

[91PDXmocha]

519 is a bad power steering switch

The intake runner control , you should check to make sure your secondarys are working. rev car in nuetral and watch the butterflys .

 

[frosho]

What makes you think the 114 is normal? It's not. Where is your IAT sensor located? Do you still have that hot air intake installed?

The only "normal" code that I can think of is 542, which is triggered every time you stall the car.

 

[zach44102]

What makes you think the 114 is normal? It's not. Where is your IAT sensor located? Do you still have that hot air intake installed?

The only "normal" code that I can think of is 542, which is triggered every time you stall the car.

i have a stock intake now with a k&n. i think i pulled the codes the wrong way so ill try again in the morning