Help me plz!!!!

[SHOF3AR]

I just got done doing my ps pump this weekend and noticed I had oil coming from my cam.so I went and bought the gaskets and tried taking it off but couldn't get that bastard to move. Is there hidden bolts that I'm missing? It looked pretty straight forward but either a)I'm a tard and it just needed a little muscle or b) there is something else holding it on. Anybody that's taken one off to do the seal plz help me.i put everything back together so I could drive it to work this week but if I can get a little insight I'll b taking it back apart soon.thx

 

[zoomlater]

Is this rear cam seal? Did you look at the front 60K instructions from the Sho Phoenix website (the link is on the main page)

 

[rubydist]

yeah, you need to drill a couple little holes in the seal (carefully!) and put screws in them and then pull on the screws to get the seal out. they get set in pretty tight after 100k+ miles of heat/cool cycles.

 

[SHOF3AR]

My 95 clocks in at just over 62k original miles but the seals are letting oil drip down the block creating smoke...looked at SHO Phoenix as suggested and I'm just not sure if my mechanical abilities can do the nessassary steps to do it properly :/