HELP!! Did 60k now car wont start!

[SeiGGy]

ok...I'm clueless here...I just finished reassembling my motor from doing the 60k service...and I go to start the car and it sounds almost like the plugs arent firing??? the starter turns the motor over but its not starting...I know I've got the plugs in the right order::

4 6 5
1 2 3

from looking at the firing block from the drivers side of the car...thats how the Ford Manual says to put them...thats right isnt it?

 

[Off Road SHO]

Standing in front of the car the back bank is 123 going from left to right. The front bank is 456. However, on the coil pack wires 5 and 6 are transposed.

Did you re-attach the intake ground strap?

Tom

 

[SeiGGy]

yeah...I think I found my problem...2 of the hoses that attached from the intake to the block (somewhere) arent hooked up...*duh*...hehe...looks like I forgot to hook them up when I put the intake down...dunno I was sooo tired and angry yesterday after foolin with the suspension that I didnt know what I was doin...so I gotta wait for some help to get the intake back up and reconnect these 2 hoses...

 

[SeiGGy]

ok nevermind...I got all the hoses hooked up right, and all the electrical plugs, and everything is in its right spot...and it still doesnt fire...if I push the gas all the way down it sounds like it back fires every few seconds but thats it...HELP!

 

[Ishodu]

Is this the way you have the wires routed?

 

[nc89sho]

i got him straightened out over the phone.. he used the Ford manuels' firing order.

all is well now the car runns great and is awaiting eibach springs and Koni Struts

 

[SeiGGy]

yep, sorry about the delay guys, things got late and I was gettin crazy, thanks to Terry I regained my insanity...we pulled the suspension tonight on all four wheels, now I'm just waitin on my Koni's and Eibachs...and omg you guys would die laughing had we taken pics of how we removed the struts from the springs on the rear

(hint: it included a vise, a socket wrench on a 1/2" breaker bar, and a pipe wrench)