Dick Tech - Dick Burtis

[Dick Tech]

I am in the process of re doing a 1993 SHO. It was orginally an Automatic and I have converted it to a speed and I am getting ready to put a 3.0 engine in that I purchased with a strong history and low miles. I have a Question about the computer. Can I use the 3.2 computer that is in the car or do I need to switch it out for a 3.0 MTX?
Any help would be appreciated!:salute

 

[Racer X]

You'll need the 3.0L computer and engine harness, ideally.

 

[St Louis SHO]

wait for phoenix to chime in Welcome to the forum!

 

[Phoenix]

wait for phoenix to chime in Welcome to the forum!

lol

ok , here we go again:

You can use both BUT these things needs to be kept togetther whatever you do (3.0 or 3.2 stuff)

ECU-harness-CCRM-o2 sensors

Plus if you use the 3.2 setup youll have to bypass the neutral switch and the clutch switch.

Save yourself lots of hassle , use the 3.0 harness/ecu/ccrm/o2.

 

[KyngofPop]

Listen to Phoenix he know. BTW welcome to the forum Dick Burtis.





Freddy B
Hi Will bored much....games

 

[HoustinoJillian]

so you ahve a 3.2 in there currently? you should use the 3.2 motor with the manual transmission rather than swapping the motor over to 3.0, unless it's blown up or something. search for 3.2 MTX