Death wobble!

[SonicRiot]

I am about to do my outer tie rods and upper and lower balljoints in front because my lane changes are becoming more and more interesting eek! due to bad tie rod ends. Also, my ball joints have excessive play in them, causing a death-wobble. Anything else I should do while I am in there? What are the best parts anyone can recommend...OEM or is there an upgrade such as Moog or whatever? I am planning on upgrading my suspension in as many ways as possible, so a harsher ride is cool with me...but is there an upgrade?

Also, is there such a thing as a front knuckle brace? I would assume no becuase there is a CV joint in the way...

Thanks.

 

[NotSoSlowSHO]

Moog inner and Moog outer greasable tie rod ends.

Moog TPR sway bar bushings, endlinks.

And you might want to consider doing the entire spring/strut install, since everything will be apart shrug

 

[SonicRiot]

Yeah...just did stuts/springs. Wish I had done this then... headbang

 

[Porkchop]

MOOG makes greasable inners????

I have the outers and the SBE's

 

[SonicRiot]

But what about the ball joints? Is there an upgrade or are OEM good enough? shrug

 

[RStalveyARFF]

the ball joints will actually be lower control arms since they aren't removable. Just get ones that are greasable, they're roughly all the same.

 

[billyshoe]

All the Moog replacment parts are fitted with grease ports.