93 ATX. Per Shotimes.com. if engine to passenger with D/R or to driving with both D and R, the engine/tranny needed to be replaced. However, when I test it with D and R, the motor tend to move to the front of the car or the rear of the car. Does that mean the engine/tranny mount OK?
Checking engine/tranny mount
- Thread starter adamc1
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
jthod
Mr. Goodwrench
it's more or less the amount it moves, all will move slightly. Does you intake have paint rubbed off in the area where it says "SHO"?
It's not as big of a problem on ATX's, as it is MTX's.
I'd say if the motor moves an inch or more, it's time.
It's not as big of a problem on ATX's, as it is MTX's.
I'd say if the motor moves an inch or more, it's time.
Similar threads
