Can I install Koni inserts into Sensatrac housings?

[frosho]

I've been gathering suspension parts for an overhaul before the convention, including a set of Koni's. I pulled the front struts from my parts car and got the inserts installed with no problems. Yesterday I started pulling the rears and realized that the car has Sensatracs out back. Before I start disassembling and taking measurements, can anybody tell me whether or not I can use my Koni inserts with these housings?

 

[SHO1]

Koni's fit in the sensatracs that were on my '89 back around '99 or so.

 

[frosho]

:thankyou:

 

[LOUDSHO92]

It would also depend on if you are talking short or long housings.

 

[frosho]

I got one of the Monroes opened up yesterday, and it looks like they'll indeed work. The body length is correct for the short inserts, and the tube ID is right around 48mm, just right for an interference fit without using the extra sleeves that came with the inserts.