Camber Bolts and H&R Springs

[Iqoniq]

Did anyone need SPC Camber Bolts when they installed their H&Rs? It suggests it might be needed for alignment, but given that there's quite a few of you here who've done the install, I figured I'd ask first, since I've seen no mention of them previously here on the forum.

 

[Zpak]

Correct, you do need them.

 

[yaycandy]

I did not. Shop told me if its done right it dosnt need them. I bought them and they didnt use them.

Theres my stock springs and bolts they didnt use.

 

[fordfanstan]

I can't say whether I actually needed them or not. I read I did, so I bought them and installed them, then drove to the alignment shop. Just so happens no alignment adjustments were needed on the rear as everything was in spec with the SPC camber bolts installed on rear.

If you do buy them, make sure you get the right SPC part number #84130. In old threads there was another part number (I wont mention here to eliminate confusion) that people used. I ordered the wrong ones first.

 

[SHOthyme]

2018 non-pp - didn't need them, brought it in to get aligned and it wasn't far off, and they were able to get it into spec.

 

[yaycandy]

I can't say whether I actually needed them or not. I read I did, so I bought them and installed them, then drove to the alignment shop. Just so happens no alignment adjustments were needed on the rear as everything was in spec with the SPC camber bolts installed on rear.

If you do buy them, make sure you get the right SPC part number #84130. In old threads there was another part number (I wont mention here to eliminate confusion) that people used. I ordered the wrong ones first.

I ordered 81280, maybe mine are wrong.

 

[SM105K]

Mine did.

 

[Iqoniq]

Thanks, guys. I went on and ordered mine with the bolts.

 

[fordfanstan]

I ordered 81280, maybe mine are wrong.

This is the part number I bought first time around. I never installed them. From older threads it appears they work, but are not actually the correct bolts for our application. So I bought the 84130 instead and used them.

 

[FiveLeeter918]

I ordered 81280, maybe mine are wrong.

those were the first availability. Nothing wrong with them they were just a tad short. the 84130 is longer and actually spec'd for the Taurus.

 

[Iqoniq]

Annnd ... they arrived this morning. My next two weekends are full now: tap the PTU first, install my H&Rs second. I might try my catch-can one of these weekends, too ... depends on how much time it takes me to do the other stuff.

Thanks, Ortiz.

 

[FiveLeeter918]

Annnd ... they arrived this morning. My next two weekends are full now: tap the PTU first, install my H&Rs second. I might try my catch-can one of these weekends, too ... depends on how much time it takes me to do the other stuff.

Thanks, Ortiz.

Sure thing!