Any interest in leds tails

[kzoosho]

I have been thinking about making a couple more sets of tails. these are just the tails it is up to the new owner to modify there wiring to fit the new lights. I would include the wire descritiont to do so but i wouldnt be able to come to everyones house and make them work right. Please let me know. If there is enough interest i will purchase supplies needed and go ahead with it. they will be 175 a set with out a set of core lights 150 with a set of core lights. Please let me know . Thanks.

 

[SHOtime2511]

are you going to be doing these for gen I's aswell.

 

[kzoosho]

are you going to be doing these for gen I's aswell.

I would need a set of cores to even start making the board for them. i can do gen 1 2 or 3 i just need the lights first.

 

[SHO2NV]

I might be in for a set. Only thing is is I'd be stumped when it came to wiring them into my car. Me and electrical things don't mix. :banghd:

 

[firstgen89sho]

I don't think that it would be hard to get ahold of a set of Gen 1 lights, if I was closer, I'd send you a set.

I would like a set for my Gen 1 if you do make them, and possibly a set for my Gen 2, will let you know on that

 

[kzoosho]

I might be in for a set. Only thing is is I'd be stumped when it came to wiring them into my car. Me and electrical things don't mix. :banghd:

Well if you want you can make one of our breakfast meets and i could wire them up for you. as far as gen ones like i said i would need a set of corelights to make the boards and it would take me a good week to do them as i work a 9-5.

 

[Eric VerValin]

I might be in for a set. Only thing is is I'd be stumped when it came to wiring them into my car. Me and electrical things don't mix. :banghd:

Psst.. you have an electrician that lives 10 miles south... :wave: Just bring a couple steaks to throw on my grill, or some chicken maybe.. **** i'm not picky..


Edit... kzoooo your not far off either...I gotta wonder up north there soon... I kinda wanna see these LED's, you got a pic up somewhere?

 

[kzoosho]

There ya go.

 

[hawkeye18]

You know, and I'm not trying to be picky (they do look really good), but do you think there would be a way to kind of lean the LEDs outboard a little? To kind of follow the slant of the very inboard edge of the light housings? I'm thinking if you added one LED in the 2nd row, 2 in the 3rd, and 3 in the 4th on the inboard edge they would look perfect.

But ****, I would still be down for at least one set as they are (maybe with no burnt out LEDs :laugh_ti. Probably two. They are hawt!

 

[kzoosho]

the way that our housings are made it would be more of a pain than anything. but yea i have one out. it would take me more time to put those 3 in than a whole row.

 

[Eric VerValin]

Wow man, yea those look nice as ****. I'll start looking around for some cores around here at the pick n pull. Gotta get up there and find my axle washer, and I'll see if I cant find some nice ones incase you need another set or something. How soon do you expect it to be before you get your supplys and stuff?

 

[adidas_kn]

I would be down for a set. How long would it take to make em? Do you need my actuall units or do I send you mine as a core after I recieve the new ones?

 

[hawkeye18]

the way that our housings are made it would be more of a pain than anything. but yea i have one out. it would take me more time to put those 3 in than a whole row.

well then, never mind. It was a good thought, anyway lol.

 

[kzoosho]

It would take me a week to make them. I would need the cores first as that would reflect your cost also. i could do them for 150 with cores 175 with out. **** i really wouldnt be making much off them as these parts are very pricey.

 

[T.O_SHO]

Damn those look good...

 

[cflguy2005]

i think id be in for a set

 

[kzoosho]

Any one that would seriuosly like a set can pm me so i can get your info. i can do half down half when im done. that way i wont get totally screwed at all.

 

[kzoosho]

well then, never mind. It was a good thought, anyway lol.

I will be making a set in the next week or 2 and will be using more leds. We will see how it turns out.

 

[kzoosho]

Ok well i have found a way to make these plug and play but they will be a little more. i can get the wiring and the fast flash fix for 20 bucks more. Then all you have to do is plug in the new lights and you are good to go.

 

[shoson]

Ok well i have found a way to make these plug and play but they will be a little more. i can get the wiring and the fast flash fix for 20 bucks more. Then all you have to do is plug in the new lights and you are good to go.

Plug n play just makes a great looking light even better. I'm in for it.