92 wiring info

[rubydist]

I picked up a nice 92 w/ no engine and have a 95 3.2 to put in it, but I don't have the 92 engine harness so I need to adapt the 3.2 harness to the 92. I have the wiring diagrams for the 95, but not the 92

Can anyone give me the pinouts for the pcm connector and the large connector in front of the drivers strut tower (behind the airbox) on the 92?

Many thanks!

 

[Racer X]

I have a rebuildable '92 harness. You'd do well to re-wrap it where it needs it, and replace a few connectors where I've scavenged (the connectors are the same on the 3.2L harness), but it would be worlds more reliable than a hacked up 3.2L harness modded to work on a 3.0L application.

Let me know if you're interested.

 

[Sho Amo]

That sounds like a much better idea.

 

[Eric VerValin]

Well... I got the diagrams and all that, and I also know that 'boat' will have an entire harness from his 92 he's parting out.

That being said, the crap inside the car would need swapped over too...

 

[Racer X]

Well... I got the diagrams and all that, and I also know that 'boat' will have an entire harness from his 92 he's parting out.

That being said, the crap inside the car would need swapped over too...

Not really.

He'd just need the '92 engine and EEC harness. Replace the harness on the 3.2L with the 3.0L harness, replace the accessory drives and timing belt drives, swap engine mount brackets, clearance the front head to clear the alternator, and boom, it's done.