3.0 plug wires vs. 3.2 plug wires

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

ISHOU

SHO Member
Joined
Jan 18, 2002
Messages
183
Reaction score
31
Location
Centennial, CO
I know it's been stated before, but just to reassure me before I order my Motorcraft wires from FPN. The 3.0 wires do fit the 3.2, the only wire that comes up a little short is number 3 and the solution is not to attach it to the wire clip.
 

Shoboy3

New Member
Joined
Jan 29, 2002
Messages
101
Reaction score
0
I put AutoLite wires on my '93 MTX. The part number is 86137 and they were about $80 from Advance Auto Parts. They are almost identical to stock wires with the following exceptions:

No cylinder number wires
Different clips (coil pack)
Lifetime warranty

I was happy with the quality of the wires, the only thing I noticed was the wires I got were 8mm, wereas I believe the Motorcrafts are 7mm.
 

sdpatt

Sr. SHO Engr.
Joined
Dec 6, 2000
Messages
9,670
Reaction score
383
Location
Dallas, TX
Yes, the WR-4033 wires will fit the 3.2L. I was able to install them on Axianator's 3.2L even with the wires in all of the clips. Just make sure the path of the wires from the rear bank to the coil pack is straight as they pass through the hoses under the throttle body.

<small>[ March 09, 2002, 12:51 PM: Message edited by: sdpatt ]</small>
 

Forum statistics

Threads
107,077
Messages
1,181,195
Members
16,141
Latest member
grapnelg

Members online

No members online now.
Back
Top