2013 Master Cylinder/Booster in 2011 SHO

[RealityCheck]

I recently purchased a 2013 EB Flex and am amazed how much better the brakes are than my 2011 PP SHO. Pedal feel is much, much better. The difference is so significant that I'm thinking of installing a 2013 master cylinder and booster on my SHO. From what I can tell from cross referencing part numbers, this should be a bolt in swap. However, I ran across a thread where someone indicated I would also need a new pedal assembly. Unfortunately, I can't find part numbers for the pedal assemblies, so I'm not sure if they're the same.

If anyone has done this swap and can give me a definitive answer, I'd appreciate it.

 

[themetalmaster]

You are lucky I saw your post over here.

I did this a few months ago and wrote a howto on another forum. The forum I posted on is behind a login, but it has been re-posted here:

http://www.ecoboostperformanceforum.com/index.php?topic=609.0


The swap is 95% bolt-in, and you do not need a pedal box. Just these two parts,

BRMC167 (Master Cylinder)
BRB65 (Brake Booster)

 

[EcoPowerParts]

Yup, read here:
http://www.ecoboostperformanceforum.com/index.php?topic=609

 

[RealityCheck]

Yup, read here:
http://www.ecoboostperformanceforum.com/index.php?topic=609

Perfect. Thanks.