Search results

  1. jspec23

    AC / Cooling problems

    Ok, so my cooling fan is being manually controlled right now with a switch I put in. I ran power right to the harness. The fan never turned on, even with the def. and AC on. Now, my AC is not working either. I press the max AC button and I can't hear or feel the compressor kick in. Is this most...
  2. jspec23

    tire size vs. rim

    That's cool, ya they were free and I needed tires bad, so not a bad deal. Thanks
  3. jspec23

    tire size vs. rim

    Quick question, I just inherited 4 goodyear eagles with only about 5k on them. size : 225 x 60 x 16 will they fit on the stock slicers?
  4. jspec23

    fan relay location?

    Hmmm, well the fan only works on high speed then, because I tried all of the wires, the only ones that work are the blue and black. What I did was just tie in a switch and a fused power line, so I can manually operate the fan, it's all I can really do right now. Looks like I'll be replacing the...
  5. jspec23

    fan relay location?

    Ya, I was thinking that. I thought I saw 3 wires going to the motor though. All of the wires around that area are all wrapped up in wire loom, and it has been raining today so i didn't really get a good look. Are there in fact 3, and if so which one is positive and which one is negative? Or am I...
  6. jspec23

    fan relay location?

    Can someone tell me where the fan relay is located? My fan is not coming on at high temps, or with the ac. The ac is not blowing out cold air, i'm not sure if it needs a charge, or if the compressor went bad. I'd like to jump the relay to test out the fan.
  7. jspec23

    car wanders, pulls.....

    Well, thanks for the info everybody. I will start on the subframe, get a new tire, and have an alignment done. Hopefully that will do it. :thumb:
  8. jspec23

    car wanders, pulls.....

    oh ya, and for awhile I've been hearing a clunk when i turn the wheel when the car is not moving, for example to pull out of a parking space. I replaced those white plastic sway bar stabilizers or whatever they are when i did the tranny.
  9. jspec23

    car wanders, pulls.....

    Well the car has 119k on it. I replaced all the subframe bolts with grade 8 bolts when i changed my tranny. The car has always pulled on me ever since I bought it last year with 104k. It always pulled to the left though. When i changed thye tranny it started pulling to the right, and just...
  10. jspec23

    car wanders, pulls.....

    either way it does, full or cruising.
  11. jspec23

    car wanders, pulls.....

    Ok, so one day my car pulls to the right. The next it will pull to the left. Sometimes it just wanders back and forth, just kind of oscillating. Would an alignment correct this? Or could I need replacement of the SFB's?
  12. jspec23

    motor mount locations?

    Can someone please tell me where the motor mounts are located? I know I have a bad one, because my engine jumps around. I tested it by setting the brake and slowly moving forward. The engine moves like 3 inches. My flex pipe also bends enough for exhaust to leak out and make my car louder. So I...
  13. jspec23

    More clutch issues

    Thanks for the info, that's what I thought :mad: Oh ya, and good job to the kid in the green SHO who blew by me at like 100 in a construction zone and cut off two people on 495 tonight, your number one buddy :thumb:
  14. jspec23

    More clutch issues

    ok, so my new clutch has a few thousand miles on it. It's one of the Autozone one's, dynapack i think. I usualy have no problems with it. Except if I drive it for awhile, like on the highway say, then I enter stop and go traffic. Well, after awhile of the stop and go, my clutch starts to grab...
  15. jspec23

    Another clutch related problem

    I got about 800 miles on the new clutch. And the sad thing is, the one I took off was in no need of replacement, but I already had the new one, and the tranny out so I figured what the heck, might as well do it now.
  16. jspec23

    Another clutch related problem

    Actually, I think the manufacturer was Dynapak, at least that's what the box said I think.
  17. jspec23

    Another clutch related problem

    I don't remeber who manufactured the clutch, I bought it at autozone, I was unable to find it on their online store.
  18. jspec23

    Another clutch related problem

    Alright, ever since I replaced the tranny and clutch, I have been hearing a rattling noise whenever the car is in neutral. When I step on the clutch, the rattling goes away. My friend said it was because of the new TO bearing, but it's been in for about a month now. Also, when I accelerate, I...
  19. jspec23

    Squeaking wheel

    Ya, i'm thinking it's some type of debris or something. The pads had plenty of meat left on them, and the rotors were not real bad so i left them alone.
  20. jspec23

    Squeaking wheel

    Ok, something is squeaking and it's really ticking me off. Two weeks ago I had the whole front end apart while I replaced the tranny, put everything back together. I noticed a quiet squeak coming from the front drivers side wheel. I was hoping it would go away on it's own. Well now it's really...

Latest posts

Forum statistics

Threads
107,085
Messages
1,181,300
Members
16,152
Latest member
lapochkarr

Staff online

Members online

Total: 329 (members: 3, guests: 326)

Share this page

Back
Top