Search results

  1. J

    No Start

    You are not going to be able to push start it. If you want to clean the injectors, you are going to have to remove them. Maybe the spark isn't strong enough and the problem is your computer like somebody else mentioned.
  2. J

    Cooling fan not coming on

    I agree, it is most likely the ECT. I had the same problem last year, my fan would never come on, even when I turned on the AC. (never tried the KOEO test.) But I replaced my ECT and still no fan. Then I replaced the ICRM (it contains the relay for the fan.) After that it worked perfectly...
  3. J

    exhaust leak

    The leak is quite loud, and it is after the O2 sensor.
  4. J

    exhaust leak

    Besides being annoying, how will an exhaust leak effect my performance? I plan on going to the dragstrip tomorrow night, and was wondering if it would hinder my performance or maybe help it. The exhaust leak is between the catalytic converters and where the exhaust branches off into 2 (kinda...
  5. J

    after 60k car wont stay running....

    I'm with Noflipping on this, same thing happened to me, that little bugger is easy to forget about.
  6. J

    WEIRD got my car running AND OVERHEATING LIKE CRAZY!!!

    I got mine from a friend for 20 bucks. I dont know if they are normally about that price or not though.
  7. J

    WEIRD got my car running AND OVERHEATING LIKE CRAZY!!!

    yes, I had the same problem when I bought my SHO, the fan would never turn on and I would overheat if I idled too long, or traveled at a slow speed. I actually did hook up a toggle switch, it didn't work out good for me, it kept on burning out the fuse I had it hooked to and melting the wires...
  8. J

    nitrous question

    I am considering putting a zex system 75 shot in my sho, maintenance is up to date, only question I have is do you think it would be necessary to get a quaife before I put it in?
  9. J

    least expensive throwout bearing?

    Thanks guys.
  10. J

    Amazing!!

    You are going to need new plug well seals, the valve cover gaskets come in a kit with the plug well seals, you should replace the intake manifold gaskets also. And you might as well replace your spark plug wires, if you haven't already. Fel-pro makes the plug well seal/valve cover gasket set...
  11. J

    least expensive throwout bearing?

    Should I get the ceramic one for 95 bucks or the ceramic one for 155 bucks with the quill sleeve?
  12. J

    least expensive throwout bearing?

    I need a new throwout bearing for my SHO, what is the best deal I can get on one? Am I better off going with the ceramic one?
  13. J

    Supercharger kits, used and for sale?

    What kind of wheel hp are we looking at with one of these powerdyne units at 6 psi?
  14. J

    Are the ICRM and CCRM interchangeable?

    Just wondering if they are interchangeable.
  15. J

    Rattling??

    I just noticed this yesterday. When the clutch is out, there is a slight rattling noise, whether in gear or in neutral, it doesn't matter. I don't have to push the clutch that far down for the noise to disappear. The noise isn't really noticeable when standing outside of the car, unless you...
  16. J

    Heat

    I posted a few weeks ago about my blend door actuator possibly being the source of my no heat problem. But before I pulled back the dash to check out the BDA, I was wondering if a vacuum line would have anything to do with the problem. Because I changed my heater core last spring and was...
  17. J

    Where can I find a blend door actuator?

    Thank you for the responses. I have already made sure that the BDA is the problem. Got the "02" code, and checked fuse 17. I don't see what else it could be. It seems as though the door is stuck at a certain point. If I set it to 90 degrees and then I set it to 75 degrees, the air coming out...
  18. J

    Where can I find a blend door actuator?

    Does anyone know where I can get one? I found a part on rockauto.com called "Heater and AC controls/valves/actuator" but I'm not sure if that is it. It costs $12.98. I am thinking that it should cost more than that, so I probably found the wrong part. I had no luck at autozone. The ford...
  19. J

    what kind of oil should i use

    WTF is wrong with Fram filters? I use castrol oil and a fram filter, but it is really just a matter of preference.
  20. J

    Rich or lean ?

    Ya, I would say that you should change your plugs and wires. I don't know how to tell if a car is running rich or lean though.

Latest posts

Forum statistics

Threads
107,087
Messages
1,181,310
Members
16,153
Latest member
lapochkarr

Members online

No members online now.
Total: 568 (members: 1, guests: 567)

Share this page

Back
Top