Search results

  1. V

    Correct Timing????

    I ran the codes and got a 177(02 is rich). But in the cylinder balance test i got a two again. Anyone have a clue or a suggestion?
  2. V

    Correct Timing????

    I'll check the codes and see what I get. I had been getting the check engine light like if i didn't let it warm up but it would go out after a brief period. And when I checked the codes I got a 111. And no saved codes?? I don't know I'll check it again. Also a previous sympton with this...
  3. V

    Correct Timing????

    Does anyone know what the correct timing is supposed to be on a stock 3.0L? I put a regular inductive timing light on and i'm getting about 10.5 degrees. If this is wrong, how do you correct it? I'm only getting like 11 mpg. I don't think thats very good. Any suggestions?
  4. V

    Fuel injectors misbehaving

    hey thanks. That'd be the one that the fuel injector seemed to not be working on.
  5. V

    Fuel injectors misbehaving

    No codes, the car was running(until i took the intake manifold off), and the fuel pressure is fine. However after a cylinder balance test it came up with a weak #2 cylinder. I'm still trying to figue out which one that is. I've seen a few different examples.
  6. V

    Fuel injectors misbehaving

    In order to check if you are getting electricity to the injector you have to take off the manifold, right? It seems i'm not getting 12v at any of the injectors in the key on position. Am i missing something? I put a meter in the wire harness and I'm getting nothing. ALso no fuel from any of the...
  7. V

    Fuel injectors misbehaving

    In order to check if you are getting electricity to the injector you have to take off the manifold, right? It seems i'm not getting 12v at any of the injectors in the key on position. Am i missing something? I put a meter in the wire harness and I'm getting nothing. ALso no fuel from any of the...
  8. V

    Harmonic Balancer Threaded Holes

    I had the same thing happen to me. I tried metric (fine and coarse) and standard but nothing would work. After about 3 hours of trips to the hardware i was messing with it when I noticed it move. I pulled the damn thing off with my fingers. Anyway the threads were messed up from the person...
  9. V

    Turn signal not working

    That's good stuff Ranger! lol
  10. V

    Turn signal not working

    THanks for the replies, I'll let you know how it goes.
  11. V

    Code RED (more like amber)

    Oh yeah, Yes I did replace the fuel filter.
  12. V

    Code RED (more like amber)

    First let me correct that. It's 150 miles in 3 months. I checked the o2 sensors as per the article on shotimes.com and the o2 sensors seem to be functioning fine. However the front one was loose. I took them out bench tested them and reintsalled them. The car still has no throttle response and...
  13. V

    Turn signal not working

    I have a 95 MTX and the right turn signal does not work. It works in the first position(the one you have to hold there), but all the way up and it just clicks real fast and no light on the dash. THe back one will blink but not the front one. I have replaced the signal bulbs and the flasher...
  14. V

    Code RED (more like amber)

    Like many other people on this site i also have bought the sho from hell. Since i bought the car 3 months ago i have only put 150k on it. The rest of the time has been spent working on it and discovering all the splendor that is the Yamaha V6. Very rarely have i experienced what these cars are...
  15. V

    Bad Fuel squirter outer

    I have a 95 MTX with 165000k on it. Some of you may recognize me from an earlier post about a malfuncitoning CID. Now that its all back together and running, albeit not well, I have no CEL. However it runs bad with infrequent moments of running good. Sometimes it runs so good but then shortly...
  16. V

    CID trouble

    One thing can be said about the SHO crowd is that you guys are extremely knowledgeable and very helpful. I just installed the new Cam Position sensor. And so far NO CEL. So thanks guys. :)
  17. V

    CID trouble

    I recently purchased a 95 MTX, so I'm new to the sho crowd. Since then the car has been one continuous headache. The CEL would come on and the car would buck real bad. Since then I've replaced the ignition coil, plugs & wires, CPS, and TB, etc. Now it runs rough at idle and periodically CEL...

Latest posts

Forum statistics

Threads
107,087
Messages
1,181,312
Members
16,153
Latest member
lapochkarr

Members online

Total: 482 (members: 3, guests: 479)

Share this page

Back
Top