1995SHO9
FLEES ARE COMIN
I was told it would support around 40......
Yah, we just turned the rod to lower the boost.
PICS! Turbo Granny Car **now w/Dyno Video**
- Thread starter NCTaurusSHO
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I was told it would support around 40......
Yah, we just turned the rod to lower the boost.
twr
whoohoo
Looking good 
Have fun with it and please be careful. You can get into a lot of trouble very quickly now.
Have fun with it and please be careful. You can get into a lot of trouble very quickly now.NotSoSlowSHO
Gas is $$ WALK!
Early stock 7.3 powerstroke turbos are good for 18-25PSI
Later models are good for 25-30PSI.
That is with the 7.3
Not sure how that would equate to the SHO.
My '96 PSD maxes out at 18PSI with just intake and exhaust. Chipped and with aftermarket injectors would push it to 20+ PSI. But then Id need a $4k tranny!
Last edited:
1995SHO9
FLEES ARE COMIN
I am not running a powerstroke turbo. I'm running a GT-42 off of a international line truck...
groove83
PimpTempoOwner
all I can say is WOW!!! great build......if I could do that much in week..........I might have a good running SHO, lol (well, it runs fine, just needs everything else looked at.)
thecrew2999
3.2 MTX SHO
pimp
New Member
Nice work, and patience comes from where?Would love to have this work done on my car but.....Again nice work and was interesting to follow.
JustinSane
SHO OFF
When can i race you in my little honda 4 cyl? i will do 1/4 or standing mile you decide, 100 bucks wager? 
you know how to get a hold of me , that is unless your scared for those that dont know my honda has a single cam 1.6 liter with a home made turbo set up, every thing on the motor is bone stock except the pistons and rods and injectors. i will be at numidia race way this coming friday if you want to show up
you know how to get a hold of me , that is unless your scared for those that dont know my honda has a single cam 1.6 liter with a home made turbo set up, every thing on the motor is bone stock except the pistons and rods and injectors. i will be at numidia race way this coming friday if you want to show up 
RiceeatingSHO
Travis R
OH SCHNNNAAAAPPPP!
Public Challenge!
Public Challenge!
JustinSane
SHO OFF
yeah just dont tell my wife lol, i promised her a new washer before i spent/lost any money. but then again im pretty sure i will be winning not loosing
RiceeatingSHO
Travis R
yeah just dont tell my wife lol, i promised her a new washer before i spent/lost any money. but then again im pretty sure i will be winning not loosing
too late...
Just kidding. HAHA
1995SHO9
FLEES ARE COMIN
When can i race you in my little honda 4 cyl? i will do 1/4 or standing mile you decide, 100 bucks wager?
I'd love to race you in the standing mile, so hit me up if you ever go down there. But you have to take your slicks off. And no wagering money, I'd prefer not to loose a weeks gas money..
somedude_001
SHO Member
I'd love to race you in the standing mile, so hit me up if you ever go down there. But you have to take your slicks off. And no wagering money, I'd prefer not to loose a weeks gas money..
a weeks gas money! I guess you haven't fully grasped how much fuel a boosted SHO can and will go through. :angelnot:
this is no joke. I just got pulled for going 100+ on the highway. I have 6 other tickets pending just from the last couple months. As you well know now 100mph only takes a few seconds to get to from a rolling start. It seems like no big deal in the car but cops tend to freak out.
JustinSane
SHO OFF
Hey its no fun with out a wager. bring the car up to the shop soon and we can video a couple runs from a dig for youtube.
here is a data log i made of a standing half mile, i did it in 22 seconds, for some reason youtube messes up the files time line slightly, when i play back the original file on my hondata software it shows i hit 0-60 in just under 4 seconds, but once i upload to you tube it messes it up and shows it as just over 4 seconds, but any way you can see it hits 155 in 22 seconds flat and was just under a half mile to complete. here is the data log for yah to watch http://www.youtube.com/watch?v=GUyhXKMV32A
here is a data log i made of a standing half mile, i did it in 22 seconds, for some reason youtube messes up the files time line slightly, when i play back the original file on my hondata software it shows i hit 0-60 in just under 4 seconds, but once i upload to you tube it messes it up and shows it as just over 4 seconds, but any way you can see it hits 155 in 22 seconds flat
and was just under a half mile to complete. here is the data log for yah to watch http://www.youtube.com/watch?v=GUyhXKMV32A
Last edited:
JustinSane
SHO OFF
oh and you and brian should come to numidia this friday, the track is way better then beaver, much better traction and over all facility. maybe he will let yah borrow his drag radials since he has the hoosiers now.
I'd love to race you in the standing mile, so hit me up if you ever go down there. But you have to take your slicks off. And no wagering money, I'd prefer not to loose a weeks gas money..
He will not want to run his slicks in the mile (and probably would not be allowed to). And the launch is of little consequence anyway.
Hey its no fun with out a wager. bring the car up to the shop soon and we can video a couple runs from a dig for youtube.
here is a data log i made of a standing half mile, i did it in 22 seconds, for some reason youtube messes up the files time line slightly, when i play back the original file on my hondata software it shows i hit 0-60 in just under 4 seconds, but once i upload to you tube it messes it up and shows it as just over 4 seconds, but any way you can see it hits 155 in 22 seconds flat
Something is not adding up. What are your 1/4 times and traps? I thought you were in the 12sec/120+mph area? If so your last 1/4 should take less than 7 seconds, putting you to the half in under 19 seconds. Did you soft launch or something?
JustinSane
SHO OFF
hi toolman. , on street tires i have to baby first, second and the top of third or i just break loose and peg revlimiter, at the drags its a little better but even on slicks i only 60ft like a high 12 second car typically low 1.8s but have done a best of 1.72, due to massive slick spin in all of first and second, yet i trap like a mid 11 second car. heres a video showing how bad i can spin the slicks even with a LSD. http://www.youtube.com/watch?v=ewkg7RJ82TI i spin all of first and all of second. and here is another video from out side, if you turn up your sound you can hear how bad and how long i spin the slicks http://www.youtube.com/watch?v=1loWHtf8Fxg i am upgrading to 23 inch slicks this week, then my 60fts should be steady low 1.7s maybe dipping into the 1.6 range, but i like it this way, there are guys who like to top end race and they sand bag a little, and when ever you have a car that traps way higher then it should for the time your dialed it always throws them off.
Last edited:
1995SHO9
FLEES ARE COMIN
I know man, it doesn't take long to get up there.
I might come up to hang out. But I really don't want to run the 1/4 mile untill I get the quaife. I'm afraid of blowing up the diff, especially with slicks.
NCTaurusSHO
Guest
aright guys, I FINALLY got a video up.... i did the 1st and 3rd runs, and that was it since it take so damn long to download... so here goes:
BROUGHT TO YOU BY NORTH CAROLINA SHO REPAIR
later,
ashley
BROUGHT TO YOU BY NORTH CAROLINA SHO REPAIR
later,
ashley
Last edited:
Similar threads
