If anyone needs NEW OEM parts . . . .

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Storm-Chaser

New Member
Joined
Jan 26, 2005
Messages
2,786
Reaction score
258
Location
Shit Louis
I started ordering a few items for Dave's SHO and will be building an order this week to be shipped early next week once Dave's parts come in (they're being sourced from a third-party Dealer-only supplier).

SO HERE'S A GREAT OPPORTUNITY TO GET NEW OEM PARTS AT 10-to-20 PERCENT BELOW DEALER LIST (ie. the parts counter price).

I'll be ordering a few things, and picking-up seals for a 60K. We'll collectively split the shipping cost based on a percentage of total. So if there's been *ANY* F*** part you've been looking for, post below (don't PM, I don't want to get these mixed-up with my Classified Ad items). Once you post below, I'll let you know if I can find it and get a price estimate which is almost always within ~$1 of the quoted price. Items are often OEM F*** blue-box parts, the remainder are MotorCraft red-box parts.


:woohoo:
 

Howdy_Doody

SHO Member
Joined
Sep 15, 2004
Messages
558
Reaction score
29
Location
Chesterfield, MO
Keith,
Can you get the driver's side foam door gasket for a 1994 Taurus? The one that goes completely around the door? Don't want the aftermarket one, it is designed for the Gen 1 and is missing a vinyl molding.

Please check and give me a call. Just trying to make my 5000 mile trip a little quieter.
 
Last edited:

Storm-Chaser

New Member
Joined
Jan 26, 2005
Messages
2,786
Reaction score
258
Location
Shit Louis
I'll call in the morning to check availability. As a heads-up, the Dealer List on the front door seals is $115.42 and $108.10 before discount.

:oogle:


Keith,
Can you get the driver's side foam door gasket for a 1994 Taurus? The one that goes completely around the door? Don't want the aftermarket one, it is designed for the Gen 1 and is missing a vinyl molding.

Please check and give me a call at home or work. Just trying to make my 5000 mile trip a little quieter.


:burnout:
 
Last edited:

Storm-Chaser

New Member
Joined
Jan 26, 2005
Messages
2,786
Reaction score
258
Location
Shit Louis
[API Newswire. July, 24, 2008. This evening at the annual convention banquet for the national SHO Club, a registrant to the banquet opened fire on convention attendees from the state of Virginia, after losing his job as a result of an internet prank two weeks prior to the event. Three people died and seven others were injured.

After a internet posting on an enthusiasts' forum for the Taurus SHO, members of the forum began calling the assailant's work number almost continuously over a three-day period. Calls to the work number he had posted on the forum, resulted in his termination after the third day of calls.

Co-workers, friends, and members of the organization, described the assailant as a quiet family-man who was not prone to violence. All were shocked by the news, and those closest to the family stated the job-loss had placed a significant strain on his marriage of 20-years, when he refused to cancel plans to attend the banquet.

. . . .

:angelnot:


Everybody call Eric!!!!!!!!!!!! :naughty:
 

Storm-Chaser

New Member
Joined
Jan 26, 2005
Messages
2,786
Reaction score
258
Location
Shit Louis
It kinda is, but I'll see if the items are available. I'm pretty sure the Gen I shifter-**** is obsolete (ie. not available).

As far as the rocker panel cover - are you talking about the cover that runs the length of the car, below the doors from the front fender to rear quarter panel; or the small quarter panel cover that is an extension of the door cladding? Also, what color panel cover are you looking for?

I will check on availability and get you a price, if either/both are available, but you will have to pay for the separate shipping cost since you're not in St. Louis.


Not StL, but Alabamastan the Heart of Dixie.

Apologies if this is for Stl folks only.


:burnout:
 

Natty Bumppo

New Member
Joined
Jun 27, 2008
Messages
8
Reaction score
1
Location
Alabamastan
HPIM4326

Here it is, the part with the finger on it. Seems it has fore and aft halves. Is this called cladding? I know it is not the rocker panel, It covers the rocker panel.
 
Last edited:

Storm-Chaser

New Member
Joined
Jan 26, 2005
Messages
2,786
Reaction score
258
Location
Shit Louis
No-go on the shifter ****.

I'll know more tomorrow about the rocker extension. Thanks for the photo, that helps alot !
 

Storm-Chaser

New Member
Joined
Jan 26, 2005
Messages
2,786
Reaction score
258
Location
Shit Louis
Need to know model-year and transmission type.

Are you looking for a new OEM compressor, or a Ford-certified remanufactured compressor?

Too late for today, but with the above info I can know by noon tomorrow, to include price. Parts wouldn't be here until sometime next week, depending on whether they're still available, discontinued, or obsolete. But they could be brought to the BBQ.


:burnout:
 
Back
Top