Just saying hello. I bought a 2017 PI as my winter project. Not a daily driver. Goal is an 11 second car for weekends at the strip. I'll continue to suck up all of the knowledge here and will (hopefully) ask questions that haven't been answered a hundred times (I hate that).
New here, building on a Police Interceptor
- Thread starter BradM
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
2K16SHO
Member
Welcome!
Bluezone
Tailgaters will be prosecuted.
Welcome
Welcome!
Zpak
Es Aich Oh!
Welcome.
There is a fairly easy path to hit 11’s with bolt on’s and a good tuner, it’s just expensive. Ask me how I know.
There is a fairly easy path to hit 11’s with bolt on’s and a good tuner, it’s just expensive. Ask me how I know.
Thanks everyone. Yes, cost is always an issue but hopefully easy (I'll just copy your build!) but that's why I started with a PI. I'll have to remove some weight (skid plate, ballistic panels, and the rear 75mph impact subframe).
Zpak
Es Aich Oh!
The PI is actually a good place to start once you trim the fat. Weight reduction is key in this platform if you’re after time slips. Once you turn the volume up the 6F55 hates life.
It’s really a shame, the motor in these cars are capable of so much more, the trans however is not.
It’s really a shame, the motor in these cars are capable of so much more, the trans however is not.
I think the 6f55 does well for what we give it!!
Jairmee
New Member
Hello, and welcome
If you want to go with civilian rear seat I did a workup some years ago on this. I added some corrections in the comments. If you have any issues you can't figure out this site has a forum dedicated to the interceptor.
Last edited:
Jairmee
New Member
mine is a 1991 taurus sho, it’s a first gen not a fourth gen.
Jairmee
New Member
All good. I should have tagged @BradM in my comment.
Similar threads
