ty91sho
EVRYDAYHUSTLIN'
wait so what weekend is this?....the 26th?
damn i dont work. i will be there.
damn i dont work. i will be there.
The MN official BS Thread..
- Thread starter Vnuk1
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
the4biddendonut
Hurry up meow.
Sorry. I meant to say next weekend.
SHO1
Coke Is It!
Umm yea, I def can't make it now either!
j/k, think I can, atleast for awhile.I already have a pic of me w/a couple of them, but I suppose another wouldn't hurt.
Well bring some friends from St. Cloud if you would Mr. Stueven...:wave:
ty91sho
EVRYDAYHUSTLIN'
iam tryin too
Good deal, thank you I apprecitate anything you can do that will bring in more people!!
whiteman_01
Well-Known Member
I have ben trying to get a bunch of people i know to get out there. The cheerleaders seem to help seal the deal though.
ty91sho
EVRYDAYHUSTLIN'
check this crap out. trading turbos on a buddys a4. and this is the "high flow" atp exhaust mani. look at these damn nuts.
and on the bottom there are 3 like this. i made a wrench last night but they are too tight to get them off with it. iam goin to buy some crows feet tonight after work in hope to get them off.
and on the bottom there are 3 like this. i made a wrench last night but they are too tight to get them off with it. iam goin to buy some crows feet tonight after work in hope to get them off.
Yeah it does! Stopped by a small show last night before University and was handing out flyers and as soon as "Vikings Cheerleaders" was said they were like "Well shit I'm in for that" lol....
Well Tyler that sucks hope that those nuts don't strip out on you!
Last edited:
Well here is a revised route to the convention that wold allow us to avoid Chicago and it's traffic all together and is only 728 miles.
Driving directions to Dearborn, MI
728 mi – about 12 hours 28 mins
Via I-39 S, I-355 S - remove all
Suggested routes
Champlin, MN
1. Head northwest on Richardson Ave N toward Colburn St N 0.1 mi
2. Turn right at Dayton Rd 0.1 mi
3. Turn left at US-169 N 1.1 mi
4. Turn right onto the US-10 E/MN-47 S ramp 0.1 mi
5. Merge onto MN-47 S/US-10 S
Continue to follow US-10 S 11.6 mi
6. Take the I-35 S exit toward US-10/Minneapolis/St Paul 0.7 mi
7. Merge onto I-35W S/US-10 S 1.3 mi
8. Take exit 28B for US-10 E toward St Paul 0.3 mi
9. Merge onto US-10 S 1.8 mi
10. Take the ramp to MN-51/Snelling Ave 0.3 mi
11. Merge onto I-694 E 16.0 mi
12. Continue onto I-494 S 0.3 mi
13. Take exit 58B to merge onto I-94 E toward Madison
Entering Wisconsin 248 mi
14. Slight right at I-39 S/I-90 E
Partial toll road
Entering Illinois 67.2 mi
15. Take the I-39 S/US-20/US-51 exit toward Rockford 0.2 mi
16. Merge onto I-39 S/US-51 S 2.8 mi
17. Take the exit onto I-39 S/US-51 S toward Bloomington Normal 22.7 mi
18. Take exit 97A to merge onto I-88 E toward Chicago
Partial toll road 52.5 mi
19. Take the I-355 S exit toward Joliet 0.3 mi
20. Keep left at the fork to continue toward I-355 S and merge onto I-355 S
Partial toll road 19.9 mi
21. Take the exit onto I-80 E toward Indiana
Partial toll road
Entering Indiana 39.3 mi
22. Continue onto I-94 E
Entering Michigan 239 mi
23. Take exit 210 for US-12/Michigan Ave 0.7 mi
24. Turn left at US-12 W/Michigan Ave
Continue to follow US-12 W 0.9 mi
Dearborn, MI
Driving directions to Dearborn, MI
728 mi – about 12 hours 28 mins
Via I-39 S, I-355 S - remove all
Suggested routes
Champlin, MN
1. Head northwest on Richardson Ave N toward Colburn St N 0.1 mi
2. Turn right at Dayton Rd 0.1 mi
3. Turn left at US-169 N 1.1 mi
4. Turn right onto the US-10 E/MN-47 S ramp 0.1 mi
5. Merge onto MN-47 S/US-10 S
Continue to follow US-10 S 11.6 mi
6. Take the I-35 S exit toward US-10/Minneapolis/St Paul 0.7 mi
7. Merge onto I-35W S/US-10 S 1.3 mi
8. Take exit 28B for US-10 E toward St Paul 0.3 mi
9. Merge onto US-10 S 1.8 mi
10. Take the ramp to MN-51/Snelling Ave 0.3 mi
11. Merge onto I-694 E 16.0 mi
12. Continue onto I-494 S 0.3 mi
13. Take exit 58B to merge onto I-94 E toward Madison
Entering Wisconsin 248 mi
14. Slight right at I-39 S/I-90 E
Partial toll road
Entering Illinois 67.2 mi
15. Take the I-39 S/US-20/US-51 exit toward Rockford 0.2 mi
16. Merge onto I-39 S/US-51 S 2.8 mi
17. Take the exit onto I-39 S/US-51 S toward Bloomington Normal 22.7 mi
18. Take exit 97A to merge onto I-88 E toward Chicago
Partial toll road 52.5 mi
19. Take the I-355 S exit toward Joliet 0.3 mi
20. Keep left at the fork to continue toward I-355 S and merge onto I-355 S
Partial toll road 19.9 mi
21. Take the exit onto I-80 E toward Indiana
Partial toll road
Entering Indiana 39.3 mi
22. Continue onto I-94 E
Entering Michigan 239 mi
23. Take exit 210 for US-12/Michigan Ave 0.7 mi
24. Turn left at US-12 W/Michigan Ave
Continue to follow US-12 W 0.9 mi
Dearborn, MI
Last edited:
the4biddendonut
Hurry up meow.
If you avoid Chicago, you avoid the tollway too.
sho'noffmtx
Many SHO's
as soon as you hit the IL boarder you hit tolls. its next to impossible to avoid and its only like $10 - $12 to go through the whole state. not sure how far out of the way it is but might be worth looking into.
ty91sho
EVRYDAYHUSTLIN'
this is what i have been doing for the past two days...
Well it only adds 28 miles to the whole trip so it's no that big of a detour, just goes further south to avoid Chicago. There are 4 Partial Toll Roads so not sure how many there are going straight through to Chicago but it should be better to take the detour. I've never been to Chicago and would like to see it someday, but with a 12 hour drive I do not think we need another 1-2 hours of stop and go traffic to see it from the highway...
sho'noffmtx
Many SHO's
we are going through at night, there for there shouldnt be any traffic but who knows??? im flexible plus i have an I-pass so it doesnt affect me!
ty91sho
EVRYDAYHUSTLIN'
i have a F-U pass
sho'noffmtx
Many SHO's
not sure if thats going to help this situation?
sho'noffmtx
Many SHO's
this is what i have been doing for the past two days...
finally some real power!
Last edited:
SHO1
Coke Is It!
this is what i have been doing for the past two days...
What, looking at/taking pics of parts on the workbench? :laugh_ti:
ty91sho
EVRYDAYHUSTLIN'
lol that into this(not my car. my turbo is a 2871 i put in this is a 2860..mine is bigger lol)
Similar threads
