mattsho1993
SHO owner
to be or not to be? Should i do it or should i just stay with the originals? anyone have pics? I was also looking a 2008 taurus leather seats pretty cheap on ebay? Just picking brains guys!
Gen 3 seats in a Gen 2
- Thread starter mattsho1993
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
SHOmethewayhome
BAD ROLE MODEL
i'm too much of a fan of the gen 1-gen 2 seats to think about swapping in the Gen 3s. plus i have a black interior and as far as i know the gen 3s only came with grey or brown.
there is someone who did this with the buckets i believe, if you do a forum search you might find the pics of.
there is someone who did this with the buckets i believe, if you do a forum search you might find the pics of.
jmpSHO
SHO Member
mattsho1993
SHO owner
driver seat is torn just figured if i replace it, with what you know.....those mustang seats are a little to bright but i do like looks good
shotyme92
WOT :)
Those mustang seats look good. Did they bolt right up?
jmpSHO
SHO Member
I wish they did lol. The two front bolts lined up pretty good after I grinded down the brackets but the two rear bolts were kind of a PITA to do. It took about 3 hours to get everything to fit right.
jmpSHO
SHO Member
They are a little brighter than the stock interior but since I have had them in there not one person has noticed that they were from a different car.
Phoenix
SHOHOLIC
GEN 1 to 3 will bolt right up , as far as the gen 2-3 wirings you may have to splice.
I had GEN3 SLO manual racks (foward / backward) on my ex 94.
I had GEN3 SLO manual racks (foward / backward) on my ex 94.
FOMOCOTOSHO
I eat Rice.
bad_4dr_sho
Now what broke
I installed Gen 3 seats into my 95 SHO, It fit great, A major weight saver, the Gen 2 seats were so much heavier!. Everything bolted up great, the wiring is backwards. I believe the Gen 2 seats had female connectors and the Gen 3 seats have male connectors. (I might have that backwards) So I just cut the connectors from a gen3 taurus at the junkyard. I like the Gen 3 seats better, And I did the swap in about an hour.
