V8 tb bore

[bubba]

I was wondering what the bore is on the v8 tb? If I remember right it's 80mm? I might have something fun going on with it!

 

[SHOZ123]

It's smaller than that. 73 mm maybe?

 

[SuperHO]

i was thinking that, too. i know it's smaller than the MAF, and that's 80...

 

[SHO U UP]

Paul is dead on. 73mm it is. I just measured mine with a caliper gauge. Now what kind of "fun" do you have going on with it?? :swing:

 

[bubba]

I thinking about doing some 77mm tbs, I've got one from v8 tb from SV&HOdan yesterday and was going to have it bored out and make a new plate, I might need a tester for this later on..... Have to find a c&c machine guy to make the plate for me!

 

[SHO U UP]

I thinking about doing some 77mm tbs, I've got one from v8 tb from SV&HOdan yesterday and was going to have it bored out and make a new plate, I might need a tester for this later on..... Have to find a c&c machine guy to make the plate for me!

Just make sure it's not going to cost ya a whole lot. I don't think there are really any kinda gains from doing this. The Gen 1/2s had a 55mm and they hopped up to a 73mm C&L unit. I just don't know if the 4mm gain will help at all. Keep us posted on what you come up with bud.

 

[bubba]

Well it worked for the v6 and went to 69mm, the car up felt better on the top end. I've been quoted a very good deal already, just for 1. I would think it would, it would help all of the other mods you have also. Also a nimz tune wouldn't hurt either, or an sct tune for that matter. I will keep everybody updated, I would hope to get a group buy going also

Just make sure it's not going to cost ya a whole lot. I don't think there are really any kinda gains from doing this. The Gen 1/2s had a 55mm and they hopped up to a 73mm C&L unit. I just don't know if the 4mm gain will help at all. Keep us posted on what you come up with bud.

 

[SHO U UP]

Well it worked for the v6 and went to 69mm, the car up felt better on the top end. I've been quoted a very good deal already, just for 1. I would think it would, it would help all of the other mods you have also. Also a nimz tune wouldn't hurt either, or an sct tune for that matter. I will keep everybody updated, I would hope to get a group buy going also

Sounds good man. I'm just about "modded" out so ****, whats one more. :laugh_ti: I currently have a SCT tune which I'm waiting for an update. That group buy would be sweet too, but I can tell ya from past experiences on here, get some dyno info cos if it doesn't help to add HP, the "natives" won't care for it.

 

[bubba]

thanks man, yeah lol I will see how everything goes. And would be just the back of the tb, as it would 73mm to 77mm, or I will have to see if I could how many mm's I could take it out "safely" 77mm would be safe I want to think, maybe I look into it, I have a person already for the dyno before and after, just to give them what they want

Sounds good man. I'm just about "modded" out so ****, whats one more. :laugh_ti: I currently have a SCT tune which I'm waiting for an update. That group buy would be sweet too, but I can tell ya from past experiences on here, get some dyno info cos if it doesn't help to add HP, the "natives" won't care for it.