Tranny!!!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

9

94ShoATX

Guest
I want to change my trans gasket and filter. They said there is 2 different ones!What trans do I have. stock 94ATX!

------------------
200111118524043245008330.jpg


G-tech
[email protected] MPH
6.8 0-60
All Stock
 

SHOnOFF

New Member
Joined
Dec 20, 2000
Messages
117
Reaction score
0
Location
Voorhees, NJ
If I remember correctly, they're not that expensive. I think I just bought both of the kits and then took one back after I was done. I think it was around $15 or so for each kit (includes filter and gasket). By the way, I think the filter is the same. The only difference is the gasket and how many "points" (bolts) it has on it. One has 15 and one has 17, I believe. Remember to not add all 12 quarts of tranny fluid right away, haha. Some stays in the torque converter when you drain the tranny pan. I had to put the car back up on the lift and drain some out after adding 12 quarts and then finding out it was too full.
smile.gif
Anyway, good luck with it, man.



------------------
Brian
'94 Green ATX
5%/13% Tint
Coneless/Boxless
Upper 60K - Finally! (8/18)
Blazer driving lights
96 Brake Upgrade
24/26mm sway bars waiting to go in (need bushings)
 

SHOspeed93

New Member
Joined
Feb 27, 2001
Messages
82
Reaction score
0
Location
Mc Henry, IL,
You should have an AXOD-E in there, enless it was replaced before you bought it, the AXOD-E is just a beefed up model of the AX4N, and I beleave that it was just internal differences so the gaskets should be the same.

------------------
93 Green ATX
DYNO results 197 torque and 175 hp at the wheels
246 torque and 218 hp at the crank
Eibach Springs, Strut Tower Braces
2 Chambered 40 Series Flowmasters
K&N Air Filter, Boxless
and Five-speed shift **** conversion
And a new trans, Indilgo Gauges
SHOcago Member
AIM: SHOspd93
 

SHOspeed93

New Member
Joined
Feb 27, 2001
Messages
82
Reaction score
0
Location
Mc Henry, IL,
You should have an AXOD-E in there, enless it was replaced before you bought it, the AXOD-E is just a beefed up model of the AX4N, and I beleave that it was just internal differences so the gaskets should be the same.
Tony

------------------
93 Green ATX
DYNO results 197 torque and 175 hp at the wheels
246 torque and 218 hp at the crank
Eibach Springs, Strut Tower Braces
2 Chambered 40 Series Flowmasters
K&N Air Filter, Boxless
and Five-speed shift **** conversion
And a new trans, Indilgo Gauges
SHOcago Member
AIM: SHOspd93
 

Forum statistics

Threads
107,077
Messages
1,181,197
Members
16,142
Latest member
Kaevorlly

Members online

Back
Top