starter bolts

[Dr_Thompson]

this is an odd request but could someone describe the bolts that hold the starter into place, they got lost in a pile of other bolts. are both of them the same size?thanks

 

[Cobraii976]

Well on my 90 the top is a 13mm hex head about 1.5 long. The bottom is a 13mm nut on stud with a 15mm nut on top of that to hold the wiring. I would guess about 1.5 long into the bell and another 1 above the nut. Hope this helps.

 

[Dr_Thompson]

yes this does help, thanks. another question, the two bolts that hold the oil pan and tranny together, there black and about 1.5 inches correct?

 

[Ishodu]

Sounds about right

 

[Dr_Thompson]

cool, one more question. on the bolt that holds the wireing for the starter, is there a nut that goes on the part that threades through the tranny. Theres a 13mm nut on the bolt before the wireing and a 15 mm that goes over it but once i thread it threw the tranny there dosnt seem to be room for another bolt on the end. Is it supposed to lock into place or am i useing the wrong bolt.

 

[K-Dawg]

On the left are the bolts that connect the oilpan to the trans case. On the right are the bellhousing to starter bolts and the 15mm nut. Hope this helps.

 

[Dr_Thompson]

thank you k dawg, that clears a lot up!!!!!!