Selling the short-short 3.2 block

[Todd TCE]

Anyone here interested in a short-short 3.2 block? That's block, crank, rods, pistons- fully assembled.

This is the base motor from my Pikes Peak car for many years. THIS is the motor with 4 wins and the class record on it as well as many other run record times. Fully running (and won) when removed. Low miles? Yea, you could call it that. Maybe 500??? Not like I put a lot of miles on a motor....

This block is fit with custom 'near' 13:1cr JE pistons with full valve reliefs installed for full on high lift cams. THIS motor was removed just over a year ago and stripped of all other items which were then put on my 3.5L motor. This is a bored 3.0 block to 92mm.

I've held onto it for some time "in case" the other blew out the side....!! So far....so good...

Anyone looking for a serious na block set up this is it. $500 takes it away- you come get it in Tempe. Roughly half the price of pistons and ready for you to swap part onto it.

Call or email me.
Todd, TCE Perf.
480-967-7901
[email protected]
http://www.tceperformanceproducts.com/

*and no, please don't ask me to "post pictures"....

 

[Toolman]

DOH!!! So many good deals out of AZ lately.

 

[SHOspazz92]

What kind of Gas would be required to run that kind of Compression Safely?

-Sam

 

[St Louis SHO]

IMO, at least 100 octane.

 

[SHOspazz92]

IMO, at least 100 octane.

If I had a truck to pull my car to events, I would be all over this.

This is a Killer deal, Good luck to whoever buys it.

-Sam

 

[SHOmethewayhome]

tempted, but sadly i am not ready to run a Hi comp motor in my SHO. the wrong wheels are being driven ATM.

 

[firebat45]

What kind of Gas would be required to run that kind of Compression Safely?

-Sam

With the right camshaft, you could run it on regular. Kinda defeats the purpose of the pistons though.

 

[sho'noffmtx]

What kind of Gas would be required to run that kind of Compression Safely?

-Sam

you could also set it up to run on E85. its cheap and is rated at 105 octane. a local guy did just that and he said he likes the setup

 

[Todd TCE]

Spent most of its life on Sunoco GT+ or VP MS109.
Probably won't be filling it up at the Circle K.

 

[Todd TCE]

Nobody locally is interested in this bottom end? Not a big deal but I thought I would put it up here before I pedal it to the hill climb guys in CO.

 

[Toolman]

IF you feel like taking the trouble to ship it, I know some people that would be interested.

 

[Todd TCE]

I'll drop it free of charge at Beau's Crates which is a few blocks from my shop.
480-966-3630 and you can deal with them directly on palleting/crating needs. They can also expedite the shipping.

I can get you an estimated weight on it if you like or you can take a best guess number of 185-200lbs and see what the options are with them. *Once it's paid for (the block not the shipping) and left with them to crate that's the end of my connection with it however- you'll need to deal with them directly on the rest.