Replacing Valve Cover Gaskets And Plug Well Seals

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

SW SHO

Boss Man
Joined
Jan 12, 2002
Messages
495
Reaction score
0
Location
Santa Fe, NM
TK`S SHO said:
I have changed the outer tyrod ends and the pass. side cv axle.I am still getting a poping noise when I back out of the driveway.


The popping sound could be a strut mount bearing, warn or bad spring insulator, or even a weak subrame bushing.

I had a popping sound at angles too, replaced struts, mounts, insulators, springs , aluminum SFB, tie rod ends etc and propblem solved. Keep in mind I was upgrading my suspension anyway at the time. Take a look at the subframe busings. If you have the originals and you can see the rubber squeezed out or falling apart, those should be replaced too, especially before you do an alignment.
 

foshotime

New Member
Joined
Feb 2, 2005
Messages
17
Reaction score
0
Location
colorado springs CO
Allow me to correct myself; Black RTV is for oil and high temp; Red RTV is for high temp; and Blue RTV is for water or coolant. :hail:

Thank You.
 
Back
Top