Replacing the Rear Coil Packs

[teryglenn1]

I know the rear coils are gonna go its just a matter of time. Is there anywhere i can get a good manual on how to go about reaching them.

97 SHO 75k Miles Welded (Kirk)

 

[SHO SPD]

V8 SHO.com is the best place!

 

[JoesSHO]

Coils

I just did mine, after owning my first GIII for about 3 weeks. Took me about 4 hours with B.S.-ing etc... It's really not that bad, and you really don't need a manual. I did however, run across this site that had pics so it didn't look totally foreign as I was working...

http://utahfordclub.com/gallery/main.php?g2_view=core.ShowItem&g2_itemId=2180&g2_page=1

I only removed the runners, and surge tank. There are two bolts holding the surge tank on the bottom rear that are the hardest part... I didn't need to disassemble anything on my throttle body or remove the cowl pieces, either.

Good luck!

 

[teryglenn1]

Hmm whats the worst damage i could do? Haha

 

[SHOZ123]

Here is a good site for info.

http://www.geocities.com/motorcity/street/7499/sparkers.html

 

[JoesSHO]

Great site, Paul! Like a mini-shophoenixproject!

I think the only thing I didn't do was pull my cowl covers off- I got everything out ok...