problems after intake manifold removal

[crazyfirecrotch]

i recently removed the intake of my 92 sho to powder coat it. put t all back together exactly how i took it apart but i cant seem to get it to start. i have covered every thing i could think of but it still will not start. i was hoping some one could shed some light on this problem i would very much appreciate it. my email is [email protected]

 

[Ishodu]

There must be a ground path from the DIS on the passenger side of intake to the ground strap on the rear of same side. So the rear bolt holding the cross over tube seems to be the issue when most people PC the intake. You will need to that to bare metal. As well as the rear portion where the ground connects to the intake upper support bolt.