PBR S.S. Lines

[SHO_POWER]

I am installing a used set of PBR brakes on my 91 SHO. I installed them and proceeded to test them out. That's when the drivers side S.S. line blew. Where is the best place to buy lines that will fit the PBR caliper ?

I see these on Ebay, that fit a 96-01 Cobra mustang are those what I want?
http://cgi.ebay.com/ebaymotors/ws/e...tem=7910007512&category=33562&sspagename=WDVW

Thanks,
Greg

 

[Dave Kegel]

I used Earls SS lines (for the Taurus) with my 13" PBR setup. They worked fine.

Dave Kegel

 

[SHO_POWER]

So does that mean you didn't need the adapter that goes on the steel line and mounts on the bracket ?

 

[Dave Kegel]

No adapter. I just unbolted the rubber line and attached the SS line. I believe I had to slightly modify the mounting plate though. The stock line is kind of D shaped where it goes through the plate and the Earls lin was round.

Dave

 

[Mr Anonymous]

The Earls work perfectly with the PBR's, as long as the hard line on the car wasn't reflared and refitted to fit a Cobra line. If the stock bracket is in place, then the Earls will work fine.

 

[SHO_POWER]

Does the Earl's kit come with all 4 brake lines ? If so will the rear lines bolt up to my rear calipers on my 91 SHO ? Is there a place in Cananda that sells this kit ?

Thanks,
Greg
91 SHO +

 

[Dave Kegel]

Yes, it comes with four lines and will work with the rear calipers. Not sure where to get them in Canada though. Can you order from Summit or Jegs?

Dave Kegel

 

[Ishodu]

Does the Earl's kit come with all 4 brake lines ? If so will the rear lines bolt up to my rear calipers on my 91 SHO ? Is there a place in Cananda that sells this kit ?

Thanks,
Greg
91 SHO +

I ordered my set from Jegs Greg. Got them in about 2 weeks.

 

[gosho89]

SHO_POWER

361-28B460 Earl's Hyperfirm Brake Hose Kits fits 94-95 Taurus SHO according to Jegs. But I found they fit my '89 SHO real nice, all 4 lines for $89.00 + freight. I also installed longer Earls banjo bolts in the front due to the thickness of the Earls hose ends. I can't recall the part numbers

http://www.jegs.com/

 

[SHO_POWER]

I ordered the Jegs lines today, thanks for all the info guys. I'll let you know how they turn out.

Greg
91 SHO +