New Potential Drop In LPFP Fuel Pump.

[Ecoboost_xsport]

Deatschworks has dropped a new LPFP pump that I think will fit into the SHO/Flex/XSport:

EVO X, 07-13 Mazdaspeed, 12-16 Civic, DW430c, 430LPH

DW430c, 430lph compact fuel pump for EVO X 08-15, Mazdaspeed3 07-13, Mazdaspeed6 06-07, Honda Civic 12-16, Honda Accord 13-17, Tundra 4.0L V6 07-14, 4.L V8 07-10, 4.6L V8 08-17, 5.7L V8 07-17, Wrangler 2007-17

deatschwerks.com

It isn't listed as fitting specifically, but it fits ALL the exact same make/model cars as the DW300c, which DOES fit. The size specs seem to fit and this MAY be worth a shot at trying out if anyone is interested. And just like the release of the DW300c, it also wasn't initially listed as fitting the SHO/Flex/XSport.

DW300C Fuel pump for Honda/Toyota/Mazda/Ford/Jeep

DW300C 340lph compact pump w/Install Kit for 2011-19 SHO, EVO X 08-15, Mazdaspeed3 07-13, Mazdaspeed6 06-07, Honda Civic 12-16, Honda Accord 13-17, Tundra 4.0L V6 07-14, 4.L V8 07-10, 4.6L V8 08-17, 5.7L V8 07-17, Wrangler 07-17

deatschwerks.com

Might be worth a shot. I may even test it to compare to all the other LPFP systems I've already tested.

In the meantime, check out my other articles and videos on the LPFP mods I have worked on...

How to Convert Your Fuel Pump Module to Accept the DW300c [Step-By-Step Guide]

Just a short (by short, I mean LONG) and unedited video of the install of the DW300c into the hanger assembly. Pretty straight forward but there are a few things not covered in the instructions and some helpful pointers I discovered. Perform at your own risk. Definitely one of those “how the...

www.fortheworkshop.com

How to Convert Your Fuel Pump Module to Accept the Walbro 525 [Step-By-Step Guide]

Here’s another quick write-up. Most of the information is in the video, but I wanted to add a bit to it, since the video can be abrupt in some cases. Was trying to keep the video as short as possible. Anyway, it’s pretty well documented that, at higher HP levels, the low pressure fuel pump […]

www.fortheworkshop.com

Significant Price Difference Between the Same Component from Two Different Platforms [Infographic]

Here’s a short write up for something I recently discovered during my endeavors to modify these buckets to accept a Hellcat Walbro 525 fuel pump. These fuel modules (or buckets/hangers) are sometimes modified to accept, usually, the Deatschwerks DW300c fuel pump and more recently, the Walbro 525...

www.fortheworkshop.com

A Guide to Understanding the Fuel Float Arrangement [Study]

Have you ever wondered how the fuel system operates? Well, here I try to explain a small portion of the system and to clarify what is going on within the fuel tank. The fuel tank on this platform is a saddle-style tank. Due to the driveshaft going to the RDU from the PTU for the […]

www.fortheworkshop.com

 

[Ecoboost_xsport]

Well, looks like it's even verified by DW themselves...

 

[TTSHO]

We need more options for the hpfp too! Then maybe they would be a few hundred bucks too lol good stuff!

 

[bpd1151]

@Ecoboost_xsport

Thank so very much for this info.

I mentioned it to my engine builder and he said to get it, without hesitation or delay.

Miffed that the DW300c I currently have in the tank has never once been used, but meh, gotta play to pay I suppose.

So, I'm not in a huge rush to get it, as my project is still being completed. So I opted for the free shipping.

Just for giggles, I did punch in my model year (2010) and it says it fits.

So we now have a GEN4 and a GEN5 owner each confirming fitment.

So that's good.

Maybe I'll post up my never used DW300c for sale at some point. I'm sure someone with lesser mods can make use of it.

Thanks once again for posting this info.

Sent from my SM-S928U using Tapatalk

 

[kryptto]

I saw that via an email from them, too bad I already paid Deatch to retrofit a new bucket and installed it. the tuner told me the pressure to the hpfp has been excellent. good to know

 

[bpd1151]

The newest LPFP from DW arrived.

Looking forward to its' use!

Sent from my SM-S928U using Tapatalk

 

[kryptto]

The newest LPFP from DW arrived.

Looking forward to its' use!View attachment 94443View attachment 94444View attachment 94445View attachment 94446

Sent from my SM-S928U using Tapatalk

Do you have the 340 in the bucket already or just upgrading with the newer pressure pump to replace the oem? With that 430 newer one?

 

[bpd1151]

Do you have the 340 in the bucket already or just upgrading with the newer pressure pump to replace the oem? With that 430 newer one?

I already have replaced the OEM with the DW300c upgraded LPFP.

But..... the car has sat since it's demise. So..... I never got to use the DW300c.

Builder's been making steady progress on it since learning of my wife's cancer diagnosis.

I'm dropping it off tomorrow for swapping.

Sent from my SM-S928U using Tapatalk

 

[kryptto]

I already have replaced the OEM with the DW300c upgraded LPFP.

But..... the car has sat since it's demise. So..... I never got to use the DW300c.

Builder's been making steady progress on it since learning of my wife's cancer diagnosis.

I'm dropping it off tomorrow for swapping.

Sent from my SM-S928U using Tapatalk

nice thanks for the update. hope she is doing well, thoughts with ya and the family. glad to see things moving forward. if you are using Brad would like his thoughts on that new pump.