mtx body mount

[d2freak82]

is there a right up on how to change a front body mount anywhere? One of the cabin ones, driver side to be exact

 

[kevinspann]

Subframe bushing?

 

[zach44102]

is there a right up on how to change a front body mount anywhere? One of the cabin ones, driver side to be exact

i dont know of a body mount, your are probably looking at a subframe bushing.

 

[d2freak82]

sorry... subframe bushing lol, same thing or so it seems to me

 

[kevinspann]

http://www.shophoenixproject.com/sfb/sfb.htm

 

[d2freak82]

that's a great write up and I appreciate the link for sure! I don't need to change the bushing just the bolt, my bushings look fine.... the nut broke loose inside.

 

[d2freak82]

no one knows how to change the inside nut for the bolt?

 

[kevinspann]

What's wrong with it? Front or rear?

 

[zach44102]

weld it back in, thats what i did. what i did was weld the nut to a washer and then welded it to the car

 

[TimboSHO]

The front nuts you can get to quite easily, they are inside the frame. To access the rear ones, you will have to peel back the carpet. Hopefully the recall has been done (you will have a black rubber plug with the nut underneath). If the recall hasn't been done, you'll need a hole saw and a 'subframe recall kit.' They're only like $15 or so and do both rear bolts/nuts.

 

[d2freak82]

I have the recall kit, but I only need it for the front

thankyou, that is quite helpful. I hope that I can find the right spot if there isn't a hole already.