moonroof dimensions needed!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

93SHOaz

Street SHO
Joined
Jan 14, 2013
Messages
16
Reaction score
5
Location
Arizona
My moonroof flew off my SHO a while ago, and I need a replacement.
I've had trouble finding something with a complete 93 moonroof kit. And I was recommended to go to sunroofdoctor.com and find one. I found a manual pop-up
and it says it is for taurus' 89-95, mine is 93 ( and obviously a SHO, but I'm not sure if the regular taurus and SHO have different moonroofs) . so this is the dimensions they gave me and I want to be sure it will work before I order it!
GLASS SIZE: 16 3/4 x 26 3/4
CUT HOLE SIZE: 18 x 28
OUTER FRAME SIZE: 18 13/16 x 28 13/16

can someone give me the dimensions?

And another note, if anyone has a moonroof kit for sale on the 93? I'll take that instead :) thanks
 
Last edited:

kevinspann

Don't take my advice.
Joined
Sep 30, 2007
Messages
3,166
Reaction score
1,884
Location
Richmond VA
How much of it do you need? The glass, or other parts too? Is it a factory installed moonroof?
 

93SHOaz

Street SHO
Joined
Jan 14, 2013
Messages
16
Reaction score
5
Location
Arizona
I had the moonroof that came with it, and it was neglected and decided to detach itself from the car while I was driving. I was just going to order this kit, which isn't power, but will work because I don't really use the moonroof anyhow. But I can't just have a hole in the car.
But if I was to buy another used moonroof from a gen 2 sho, I would buy everything having to do with it. motor, glass, tracks, trim, etc.
 

jelloslug

Digital
Joined
Aug 29, 2002
Messages
4,206
Reaction score
388
Location
Greenville, SC
If you have a factory installed moonroof an aftermarket kit will be very difficult to install. You would be much better off getting the correct oem parts. Used parts should not be hard to come by, there are plenty of people here parting out cars. Any Taurus or Sable from 86-95 will work as well as any Lincoln Continental from 88-94.
 

SHOVNST

Blood type: SHO+
Joined
Jan 24, 2004
Messages
823
Reaction score
404
Location
Niwot, CO
If the sunroof is factory go to a u-pull yard and get a replacement. Cut out the entire roof section with the sunroof intact and disassemble everything at home. A handheld hacksaw will work fine. You should be able to easily find one and get everything for cheap.
 

mrecoolgar

SHO NUP
Joined
Jun 5, 2004
Messages
1,046
Reaction score
546
Location
Hershey-PA
This happened to me once.
The cause was that the halo screws were not in place.
Reach 45mph and the glass panel starts to lift, eventually tearing itself off the car.
You need the entire moonroof track with arms and such.
I have a complete unit with glass, with or without motor.
PM me if interested.
 
Back
Top