lowering

[yamahaSHO]

I am looking at lowering my car, I really only want to lower the front about an inch. If I lower the car, will I have to get a camber correction kit?

 

[SHO5]

if you want to lower it look at RI-SHO. He lowered front 2.5 and bck 1.75. Looks really nice

 

[yamahaSHO]

SHO5:
if you want to lower it look at RI-SHO. He lowered front 2.5 and bck 1.75. Looks really nice

I want to keep stock wheels, they wont look the same or fit the same as 18" wheels. Like all SHOs the rear sets lower, so I just want the front to match.

 

[RI-SHO]

If you rear sits low it could be just worn springs which happens in our SHO's. What do you mean you want the stock wheels to fit? My 225/55/16 tires on the slicers fit just as good as my 235/40/18 tires on the 18x8 rims. So vertically you wont have fitment problems unless you go with a 3" drop or anything larger than a 26.5" tire diameter.

About you camber worries, you wont have a problem with anything below a 2" drop, even with my 2.5" I have -1.25 camber which is ok for the rims I have but can get better with an aftermarket camber kit or stock/smaller slicers.