LMS Tune only?????

[321GO]

2015 SHO. Sorry if this is a dumb question I'm just new at this stuff.
Anyone running a LMS tune only? No 3bar or tstat or any other upgrades....completely stock.
I'm was thinking about getting just the tune for now...then in a few months get the 3bar and tstat.
Is this not recommended?

 

[Usmcsho01]

2015 SHO. Sorry if this is a dumb question I'm just new at this stuff.
Anyone running a LMS tune only? No 3bar or tstat or any other upgrades....completely stock.
I'm was thinking about getting just the tune for now...then in a few months get the 3bar and tstat.
Is this not recommended?

The three bar in the t-stat is such minimal money why run the risk

Sent from my XT1650 using Tapatalk

 

[BamSHO]

They will send you tune files for stock Tstat and the stock 2bar. I started out that way on the '12, but the more aggressive tune files require the 3bar map and 160 tstat. Trust me, just do it now.

 

[SilverSH0]

At a minimum I would go tune + 3 bar. A 3 bar is only an additional ~$40 (from Rockauto) and you get a much faster tune.

 

[ridered74]

I ran tune only for about 6 months before getting the 3 bar. The tune was a huge difference from stock, but adding the 3 bar was noticeable as well. As said above, I would recommend both for sure.

 

[321GO]

I ran tune only for about 6 months before getting the 3 bar. The tune was a huge difference from stock, but adding the 3 bar was noticeable as well. As said above, I would recommend both for sure.

did you ever put the Tstat on it?

 

[ridered74]

Yes, I did the Tstat with the initial tune.

 

[Foran]

I'm running a tune with the 3 bar and a stock tstat.

 

[marius883]

I've been running just tune only (stage 4 plus 91) for a year now without any problems