Friday last week, I got into my car started it up and noticed that it seemed weak like I had left a light on from the night before. Checked everything and nothing was left on. Drove 25 miles to work not a single problem diming of the lights or lack of power nothing. then the car sat while I worked came back out to the car started it up and it seemed slightly weaker then before. Double checked everything AGAIN and drove home with out a problem. Car sits all weekend not started even once. Monday morning rolls around and the car is really stugglin to start but does. No problems as stated above to work. I work my shift and come back out to go home now the car will not start and when it does try to the RPM gauge jumps to about 1500 to 2000 but no noise or anything while that gauge jumps. Now the fun stuff.
things that i tried.
1) seemes like a dead battery right. the battery is a couple of day older then a year and was never dead before this. Jumping the car did not work.
2) Maybe the altenator isnt charging the battery causing the weak start. the altenator is the same age as the battery.
3) the starter clicks once and sometimes not at all. So i tried bridging the starter with a screw driver. Did not work.
4) smacked the starter thinking that it was on a bad spot. Still nothing.
5) used the positive cable that should go to my positive terminal while jumping and placed directly to the positive on the start. I managed to get a single click out of all the sparking going on.
Any ideas you 2 cents is greatly appreciated.
things that i tried.
1) seemes like a dead battery right. the battery is a couple of day older then a year and was never dead before this. Jumping the car did not work.
2) Maybe the altenator isnt charging the battery causing the weak start. the altenator is the same age as the battery.
3) the starter clicks once and sometimes not at all. So i tried bridging the starter with a screw driver. Did not work.
4) smacked the starter thinking that it was on a bad spot. Still nothing.
5) used the positive cable that should go to my positive terminal while jumping and placed directly to the positive on the start. I managed to get a single click out of all the sparking going on.
Any ideas you 2 cents is greatly appreciated.