Phoenix
SHOHOLIC
They were sandblasted and powdercoated with a special hi-temp powder. And installed. Enjoy.
In the making: Headers -100% completed
- Thread starter Phoenix
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Very Very nice! When's the engine going in?
NICE
BlackonBlack89
SHO Member
They look awesome. 
Nice job. The p/c really top it off nicely! I hope it last as I think it only rated to 800 or so degrees!
Nice job. The p/c really top it off nicely! I hope it last as I think it only rated to 800 or so degrees!
1993MTXSHO
Its a Taurus...
Looks like it's on a sho subframe to me, I'd say its going in his car.
Those are awesome headers though man they came out great, I like the color too
BlackonBlack89
SHO Member
Looks like it's on a sho subframe to me, I'd say its going in his car.
Those are awesome headers though man they came out great, I like the color too
He said when not what:laugh_ti:
not to be a ****.
but why not clean the welds up before the coating?
looks good otherwise :wave:
but why not clean the welds up before the coating?
looks good otherwise :wave:
1993MTXSHO
Its a Taurus...
SHO.fast
Wants Boost
damn man those are sick looking
when are you putting them up for sale
nice work man
when are you putting them up for sale
nice work man
PROPHET
Well-Known Member
Look great.
Phoenix
SHOHOLIC
Tomorrow (Sat the 14th) , My buddy is comming to help me out align the subframe/struts/rack joint. We should be able to do this in a couple hours.
The welds were cleaned with the sandblast , but I didnt want to spend precious time to buffing the welds all nice and straight , you wont see it anyway (or barely) when it's in the car. There's what maybe 10 guys who's got headers in working SHOs right now? Who cares about the welds. (Dont mean to be rude here)
I'm curious about the gains you get from these.
Rubix
SHO Member
- Joined
- Jan 12, 2005
- Messages
- 1,329
- Reaction score
- 858
^ x2
Looks great... I'm wondering how you're going to keep all that white clean
Awesome work man
Looks great... I'm wondering how you're going to keep all that white clean
Awesome work man not many. prolly a reason for that
i hope these work out for you. ive drivin an SHO with LT's and was let down lol
me too.
Phoenix
SHOHOLIC
Same here , I have no clue , and I'll probably never know for sure - never dyno'd it last year...why-o-why...
1993MTXSHO
Its a Taurus...
I want sound clips
St Louis SHO
Rollin' coal
My 91 with IPT's sounds like raw ass.... I'm removing them soon.
I like what you did there though phoenix. Hopefully your resonator and mufflers are rasp friendly.
I like what you did there though phoenix. Hopefully your resonator and mufflers are rasp friendly.
Phoenix
SHOHOLIC
I want sound clips
Ohh you will , im planning to start that puppy straight headers - poor neighbors....
Right now I got 1 x 3" Magnaflow **** that servs as a resonator plus my 2 see-through fart cans , But I got 2 X2.5 Magnaflows muffs to replace the fart cans...I know it wont be enough but I hope to tone it down..
SASHO91
Zoom Zoom
I would try and fab some type heat shield for the oil filter as well. Or grab a remote setup...
They look great though.
You should check out http://www.designengineering.com/products.asp
They look great though.
You should check out http://www.designengineering.com/products.asp
SASHO91
Zoom Zoom
I would try and fab some type heat shield for the oil filter as well. Or grab a remote setup...
They look great though.
You should check out http://www.designengineering.com/products.asp
They look great though.
You should check out http://www.designengineering.com/products.asp
Similar threads
