95sflasho
New Member
This may be a bit long. I recently changed a coolant hose that required I take my intake off. While I had it off I cleaned out the nostrils and throttle body and intake to get rid of a 332, 172 and 173 code. Got it all back together and it ran horrible! Turns out I had a vacuum leak caused by the intake gasket (original one) so I took it apart again cleaned the gasket and put back together. Ran better but was throwing a 335 code so I replaced the DPFE sensor and checked the lines for the EGR which were ok. All back together but it's still not running right. It's almost like it still has a vacuum leak and I'm still getting the 335 code??!! I replaced the TPS and 02's at 97k miles (it has 115k now) and the IAB has never caused a problem. I've already tried to re-set the idle and had no luck. Sometimes it idles so low the oil light comes on. Any advice would be appreciated. the intake gasket was not perfect, but it's a piece of metal! Could that be the problem? Thanks all
