Huntervf
Bored now
Ok, I have a set of stock spring that will be going on the 91, but I have no idea which are the front and which are the rear. Is there any easy way to identify which is which?
Identifying front and rear springs
- Thread starter Huntervf
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
SHORANGERBIRD
Restorer of SHO
-other than visual with ones on a car, would be by the code tags on the spring, if they are still there.....
CerberuS
300 HP N/A SHO
rear will have only one spot to hook the swaybar link. front will have the 2 spots to hook it to fit left & right.
Jonny Cash
Good boy
Rear springs are skinnier, and do not taper.
skinnier meaning the entire width of the spring is smaller.
skinnier meaning the entire width of the spring is smaller.
SHODWN
Mother Threasa
Like jason said. the rears are all one width the fronts start out small go big and go small again.
Shoaz
Studly dood
nx - fronts taper, rears don't.
If the tags are still there it might be worth lookin' 'em up. Some SHO springs came from SLOs. My 95 came from the factory with SLO springs.
If the tags are still there it might be worth lookin' 'em up. Some SHO springs came from SLOs. My 95 came from the factory with SLO springs.
Huntervf
Bored now
As always, thanks for the good advice guys 
Similar threads
