krek
ChumpCar Racer
I need to order some vinyl for our crapcan racer today and can't find this info anywhere (I'm sure it is out there, the key words are "I can't find it").
So... how wide is a Gen 1 hood?
So... how wide is a Gen 1 hood?
How Wide is Gen 1 Hood?
- Thread starter krek
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
jonheese
Used-To-Know-It-All
Okay, I just took a tape measure outside and measured the hood on my '90.
It's 56" across the leading edge and 58" across the trailing edge. It's also 44" from front to back in the center.
Hope that tells you what you need to know. Let me know if you need any more/different measurements.
It's 56" across the leading edge and 58" across the trailing edge. It's also 44" from front to back in the center.
Hope that tells you what you need to know. Let me know if you need any more/different measurements.
krek
ChumpCar Racer
PERFECT!
Thanks, my SHO is over an hour away locked in a garage that I don't have a key to... that's why I asked.
Thanks, my SHO is over an hour away locked in a garage that I don't have a key to... that's why I asked.
krek
ChumpCar Racer
And THANK YOU!
jonheese
Used-To-Know-It-All
No problem. That's what the "THANKS" button is for.
Similar threads
