Help brake grabing problem

[92YamahaSHO]

I just installed a new brale caliper bracket and now the brake (rear drivers side) is over heating ,so i jack up the car and i try to spin the tire and it feels like the brakes are draging and grabing still. Did i install the caliper wrong? whats the deal i tried to compress the caliper but it didnt want to go much but i got it on any way maby the caliper needs to be compressed more or did i install the pads wrong? any help would be apreciated.

 

[92YamahaSHO]

ok now that the brake is cooled down it isnt harldy grabing any more but still a little bit it only gets stuck like that when the car is driven for a few miles or more!

 

[93SHO'nOFF]

I just installed a new brale caliper bracket and now the brake (rear drivers side) is over heating ,so i jack up the car and i try to spin the tire and it feels like the brakes are draging and grabing still. Did i install the caliper wrong? whats the deal i tried to compress the caliper but it didnt want to go much but i got it on any way maby the caliper needs to be compressed more or did i install the pads wrong? any help would be apreciated.

Did you try to compress the piston back.... or ....Turn the piston back into the caliper?
The rear caliper pistons get turned back into it in a clockwise direction.There is a tool to do that.If you compressed the pistons straight back into it they are probably busted.
Does it have a good pedal?
Check to see if the e brake works?
Check if wheel stops and releases while applying the brakes on the jack.
Sounds like you might be getting new calaper's.
Good Luck Dude,

 

[SHOZ123]

Rebuilt rear calipers are cheap at AutoZone. (Just be sure to have a core). So cheap I would consider just getting new calipers and new pads every time.

Be sure you have good hoses on the back.