Flywheel/Flexplate

[Xs SHO 1]

The bolts on my flexplate from my 3.2L, are the bolts left threaded? The engine is out on a tire.

Thanks

 

[Off Road SHO]

They are normal threads. Lefty loosey, righty tighty. Clock wise to tighten, counter clockwise to loosen. If you grew up with nothing but didital clocks, I don't know what you're going to do.

Because it's sitting on a tire you will have to chain the flex plate to the block to keep it from turning. Use one of the flexplate-to-torque converter holes to anchor the chain. Good luck.

Tom

 

[Xs SHO 1]

Those bolts must be torqued on there real good, I was having a hard time loosening them, I just wanted to make sure it was normal threaded.

Thanks!