Fixing Door Cladding.

[SHOOFF508]

My RF door cladding (aka the SHO pannel) is coming unclipped in the front it appears one of the clips is broken and its catching on the front fender occaisionally. Is there some kind of quick fix, like epoxy or something i can use to get it to sit against the door better, theres an 1/8" gap in the front, it appears to be wind warped.

 

[excidere]

There should be a stud at the front of the cladding that has an acorn nut on it that you can access from the inside of the door. The nut may have just came off. Judging from your Sig however it is probably rusted to oblivion. You could try epoxy, but it would be band aid and look like ****, not to mention if you ever needed to pull it off it would be bad.

If it was me I would try and get a nut back on the stud and pull it down the right way, and if that is not a possibility I would get a new panel with a good stud on it and bolt it down properly!