Engine grounds and vac hoses

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

tfalconier

New Member
Joined
Mar 18, 2003
Messages
78
Reaction score
0
Location
CT
On my 90 sho by the fire wall the ground going to the firewall isnt connected to anything, and i have some vacume lines off, like the lines for the intake butterflies. Does anybody know where i can get a print out of where all this shit goes, im sure there is more stuff disconnected
 

SHOZ123

SHO Member
Joined
Dec 2, 2000
Messages
12,152
Reaction score
673
Location
Illinois
A vacuum diagram should be on your radiator cover. Grounds are from the body to the engine or battery. As long as they are clean and tight it is not critical where they are attached.
 

tfalconier

New Member
Joined
Mar 18, 2003
Messages
78
Reaction score
0
Location
CT
the radiator cover part is long gone, i know it doesnt matter where the grounds go but i would like them in the right place.
 

sdpatt

Sr. SHO Engr.
Joined
Dec 6, 2000
Messages
9,670
Reaction score
383
Location
Dallas, TX
Reprinted from a previous post:

"The routing of the secondary butterfly vacuum lines is from the center tap on the intake's rear plenum to the front (forward) tap of the black plastic accumulator tank. From the rear tap of the accumulator to the bottom tap of the solenoid. From the top tap on the solenoid to the "T" fitting under the idle air control valve. From the side post of the "T" to the rear bank secondary vacuum diaphragm valve and from the front post on the "T" to the front bank diaphragm valve."
 

Forum statistics

Threads
107,077
Messages
1,181,195
Members
16,142
Latest member
Kaevorlly

Members online

No members online now.
Back
Top