Desparetely Need Illinois Giii Owners

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

SHOWHAT9

SHO Member
Joined
Dec 14, 2002
Messages
381
Reaction score
9
Location
WHEATON, IL
ADVERTISEMENT

Ford Taurus SHO (1996-1999) Lawsuit



Re: Eck et al. v. Ford Motor Company

02 CH 22068, Cook County, Illinois

ECL&G No.: 9411


Dear Current or Former 1996-1999 Taurus SHO Owner:


As you should be aware our firm is representing the plaintiffs and the putative class members in this matter involving the alleged defective camshafts and false representations made by Ford involving the Ford Taurus V8 SHO1996 - 1999 model years. You are receiving this letter as you have either contacted our firm or Mr. Eck or Mr. Wright and they forwarded your information on to us.


As a plaintiff and class representative, Ford's attorneys will request discovery from you. Discovery can be in the form of answering questions about your SHO, producing documents of the purchase and the maintenance of your SHO. If you still own the SHO, you may need to have Ford examine your SHO; so far this has been done in the SHO owners' city of residence. You may also need to be deposed by Ford; answering questions under oath that are recorded by a court reporter.


We are specifically looking for plaintiffs who have experienced any of the following:


1. Experienced a camshaft failure and have receipts for the repairs.

2. Have had their camshafts welded to prevent a camshaft failure and have the receipts for the weld.

3. Had a camshaft failure and sold the vehicle at a loss.

4. Had a camshaft failure and could not afford the repairs and did not sell or dispose of the vehicle.

5. Contacted Ford's Customer Service Line and were informed that the problem was caused by "abuse or neglect" or were informed that this had never happened to anyone else.

6. Wrote to Ford regarding a camshaft failure.

7. Have seen Ford's advertisements or the statement in the owner's manual that the engine could run 100,000 miles without maintenance.

8. Had Loctite applied to the camshafts.

9. Had any other type of engine failure that resulted in repairs to the engine.


If you are interested in being a plaintiff and class representative please promptly contact me directly at (312) 917-4521.


Sincerely,


s/ Curtis C. Warner

Curtis C. Warner





----------------------------------------------------------------------

Curtis C. Warner *

Edelman, Combs, Latturner & Goodwin, LLC

120 S. LaSalle St., 18th Floor

Chicago, IL 60603

Tel: (312) 739-4200 ext. 521

Fax: (312) 419-0379

E-mail: [email protected]

* Also admitted in Michigan

For any GIII owner in IL that has a question, call me directly at 630-421-1102 -
This is extremely urgent to assure the continuation of my action against Ford started almost 4 years ago.
 

SHOWHAT9

SHO Member
Joined
Dec 14, 2002
Messages
381
Reaction score
9
Location
WHEATON, IL
Xmann01 said:
Yes has to be a current Illinois resident. If you can help us out, contact Curtis Warner at the phone number at the top of the thread.
Got any questions, give me a shout.
Thanks
 

SHOWHAT9

SHO Member
Joined
Dec 14, 2002
Messages
381
Reaction score
9
Location
WHEATON, IL
turbotbirdguy19 said:
Im a current illinois resident and had welds done by performance plus in wisconsion.have reciepts also :)

If you want to get involved, contact Curtis Warner at the information on the sticky asap.
thanks man
 

nik97

SHO Member
Joined
Aug 16, 2005
Messages
1,180
Reaction score
129
Location
Mile high
I am not an IL resident- sorry. However, if it is any help at all, John Jones has at least 9 weld documentations(as mine is #9) in Glendale AZ. John Jones can be found @ V8sho.com thru "Folks who will weld your'e cams". You may have all of this info already but if not, hope it can help:)

-Nick. '97 TR.
 

inverse1216

SHO Member
Joined
Jul 4, 2004
Messages
582
Reaction score
10
Location
daytona beach, fl
idk if im any help but i just bought a g3 last month the cams have already been welded i dont believe i have a reciept but i can contact the previous owner and find out. i believe kirk douchette did the weld. let me know if i can be any help sorry if im not.
 

V6&V8SHO

SHO Member
Joined
Jan 1, 2002
Messages
567
Reaction score
15
Location
wauconda, IL
inverse1216 said:
idk if im any help but i just bought a g3 last month the cams have already been welded i dont believe i have a reciept but i can contact the previous owner and find out. i believe kirk douchette did the weld. let me know if i can be any help sorry if im not.


The 97 Ebony Satin that you bought from me was welded by Eric Lehmann :cool:
 

CMurder

New Member
Joined
May 9, 2005
Messages
13
Reaction score
0
Location
Illinois
Another Gen3 Cam Weld In Illinois

Hey, I gotta 99 Gen 3 that was also welded by Eric Lehman. Well, I am not sure how long I will be holding ono it. With all the stupid little problems with the SHOs, I might trade it in for a 2004 Maxima.:thumb:
 

Forum statistics

Threads
107,087
Messages
1,181,313
Members
16,153
Latest member
lapochkarr

Members online

Back
Top