console question

[adidasho]

Does anybody know how to get the center console out froma 94? I got all the screws undone but it is still attached in some unseen place and I lost the ALLData procedure I had printed out.

 

[cRaZySHO.]

By center console, you mean the part that goes around the shifter right? If so, all you need to do is take the one screw out from under the cup holder, and the two under the armrest once you flip it open. After that, there are no more screws, just snaps underneath. You just have to pull up on the spots of resistance, and it will come out.

 

[adidasho]

which 2 screws under the armrest....I found 6, 2 on the lower tray and 4 on the upper tray part.
Does it all come out as one unit?

 

[SHO92]

The screws under the arm rest do not hold the center section onto the console. Theres just the 1 screw under the cupholder, and the "tension clips" around the edges. It might be a good idea though, to remove the screws that hold the armrest on, since it can get it the way when removing the center section, but it isn't nessecary. If you are trying to remove the entire console, there are 2 nuts that attach it to the dash under the radio area that you may miss if you are in a rush.

<small>[ March 03, 2003, 02:17 AM: Message edited by: SHO92 ]</small>

 

[marbs]

Hav eyou looked under the ash tray? Their's PROBABLY one their you might have forgotten about. shrug